Multi-objective green design model tomitigate environmental impact of construction of mega columns for super-tall buildings

被引:16
作者
Choi, Jewoo [1 ]
Lee, Min Gyu [1 ]
Oh, Hyung Seok [1 ]
Bae, Sang Geun [1 ]
An, Jung Hwan [1 ]
Yun, Da Yo [1 ]
Park, Hyo Seon [1 ]
机构
[1] Yonsei Univ, Dept Architectural Engn, Seoul 120749, South Korea
基金
新加坡国家研究基金会;
关键词
Green design method; Embodied CO2 emissions; Construction material cost; Mega column; High-rise building; SUSTAINABLE STRUCTURAL DESIGN; SHEAR-WALL SYSTEMS; CO2; EMISSIONS; LIFE-CYCLE; ENERGY-CONSUMPTION; GENETIC-ALGORITHM; SEISMIC DESIGN; DRIFT DESIGN; CONCRETE; STEEL;
D O I
10.1016/j.scitotenv.2019.04.152
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
The mega columns used in super-tall buildings are several meters in size; thus, a greater quantity of construction materials are required than for a general column. Considering the environmental impact, research on a green design model for super-tall buildings is necessary. This design model should minimize both CO2 emissions and cost in the mega-column construction and design phases with consideration of the member or building size. In this regard, a multi-objective green design model (MOGDM) capable of minimizing construction cost and reducing CO2 emissions is proposed in this study. The MOGDM is applied to the design of mega columns for a super-tall building and its performance is evaluated based on the average environmental impact reduction rate (AER) and the average increase-in-cost reduction rate (AICR); these indexes are developed to assess the CO2 emission and construction cost reduction capability. Under the loading scenarios considered in this study, the average AER and AICR for the MOGDM output are 6.76% and 58.02%, respectively. Thus, the evaluation results confirm that the MOGDM proposed in this study can effectively reduce CO2 emissions and cost in the design and construction phases of mega columns for super-tall buildings. (C) 2019 Elsevier B.V. All rights reserved.
引用
收藏
页码:580 / 591
页数:12
相关论文
共 54 条
[11]  
ASTM, 2011, A615 DEF PLAIN BILL
[12]   Cost optimization of three-dimensional beamless reinforced concrete shear-wall systems via genetic algorithm [J].
Atabay, Senay .
EXPERT SYSTEMS WITH APPLICATIONS, 2009, 36 (02) :3555-3561
[13]   Embodied energy of buildings: A review of data, methods, challenges, and research trends [J].
Azari, Rahman ;
Abbasabadi, Narjes .
ENERGY AND BUILDINGS, 2018, 168 :225-235
[14]  
Bao L., 2015, Int. J. High-Rise Build, V4, P219, DOI [10.21022/IJHRB.2015.4.3.219, DOI 10.21022/IJHRB.2015.4.3.219]
[15]  
Bogdan T., 2017, CE/Papers, V1, P1879
[16]   Impact of using biomass boilers on the energy rating and CO2 emissions of Iberian Peninsula residential buildings [J].
Carpio, Manuel ;
Zamorano, Montserrat ;
Costa, Mario .
ENERGY AND BUILDINGS, 2013, 66 :732-744
[17]  
Chan C. M., 2000, ADV TECH STRUCT ENG, P1
[18]   Design technology based on resizing method for reduction of costs and carbon dioxide emissions of high-rise buildings [J].
Choi, Se Woon ;
Oh, Byung Kwan ;
Park, Hyo Seon .
ENERGY AND BUILDINGS, 2017, 138 :612-620
[19]   Multi-objective seismic retrofit method for using FRP jackets in shear-critical reinforced concrete frames [J].
Choi, Se Woon ;
Kim, Yousok ;
Park, Hyo Seon .
COMPOSITES PART B-ENGINEERING, 2014, 56 :207-216
[20]   Multi-objective seismic design method for ensuring beam-hinging mechanism in steel frames [J].
Choi, Se Woon ;
Park, Hyo Seon .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2012, 74 :17-25