Aging properties and mechanism of the modified asphalt by packaging waste polyethylene and waste rubber powder

被引:50
作者
Fang, Changqing [1 ]
Wu, Caixia [1 ]
Yu, Ruien [1 ]
Zhang, Zengping [2 ]
Zhang, Min [1 ]
Zhou, Shisheng [1 ]
机构
[1] Xian Univ Technol, Coll Printing & Packing Engn, Xian 710048, Shaanxi, Peoples R China
[2] Changan Univ, Sch Highway, Minist Educ, Key Lab Special Area Highway Engn, Xian 710064, Shaanxi, Peoples R China
基金
中国国家自然科学基金;
关键词
packaging waste polyethylene; composition; modified asphalt; aging; rotating thin film oven test;
D O I
10.1002/pat.3048
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
For the consideration of the environmental and economic issues, retrieved packaging waste polyethylene and waste rubber powder were selected as modifiers to modify the ordinary oil asphalt, and the rotating film oven test was adopted to study the aging process of the modified asphalt. The results showed that the performance of the modified asphalt deteriorated, as indicated by the increase in the softening point and the reduced ductility and penetration. However, compared with nonmodified asphalt, the rangeability of the performance indicators of the modified asphalt before and after aging became narrow, indicating that the aging properties of the modified asphalt were improved. In the modified asphalt system, the swelling of the polymer modifiers was caused by the absorption of the light components of the asphalt, thereby reducing the formation of asphaltenes in the aging process. The polymer modifiers absorb the light oil of the asphalt, which can reduce the content of free radicals and improve the aging properties of the asphalt. In addition, the waste rubber power containing antioxidants and anti-ozone agents effectively improves the antiaging properties of the asphalt. Copyright (C) 2012 John Wiley & Sons, Ltd.
引用
收藏
页码:51 / 55
页数:5
相关论文
共 23 条
  • [11] Composite of low-density polyethylene and aluminum obtained from the recycling of postconsumer aseptic packaging
    Lopes, Cristina M. A.
    Felisberti, Maria Isabel
    [J]. JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 101 (05) : 3183 - 3191
  • [12] Lu X. H., 2000, POLYM TEST, V20, P1
  • [13] Ageing by UV radiation of an elastomer modified bitumen
    Mouillet, Virginie
    Farcas, Fabienne
    Besson, Stanislas
    [J]. FUEL, 2008, 87 (12) : 2408 - 2419
  • [14] Ouyang C. F., 2005, POLYM DEGRAD STABIL, V87, P2
  • [15] Ouyang C. F., 2006, POLYM DEGRAD STABIL, V91, P4
  • [16] Perugini F., 2005, ENVIRON PROG, V46, P94
  • [17] Asphalt modification with different polyethylene-based polymers
    Polacco, G
    Berlincioni, S
    Biondi, D
    Stastna, J
    Zanzotto, L
    [J]. EUROPEAN POLYMER JOURNAL, 2005, 41 (12) : 2831 - 2844
  • [18] [钱春香 Qian Chunxiang], 2005, [东南大学学报. 自然科学版, Journal of southeast university. Natural science edition], V35, P945
  • [19] Modelling short-term aging of asphalt binders using the rolling thin film oven test
    Shalaby, A
    [J]. CANADIAN JOURNAL OF CIVIL ENGINEERING, 2002, 29 (01) : 135 - 144
  • [20] Biodegradable polymers for food packaging: a review
    Siracusa, Valentina
    Rocculi, Pietro
    Romani, Santina
    Dalla Rosa, Marco
    [J]. TRENDS IN FOOD SCIENCE & TECHNOLOGY, 2008, 19 (12) : 634 - 643