Automotive Battery Monitoring by Wireless Cell Sensors

被引:0
作者
Schneider, Matthias [1 ]
Ilgin, Sergej [1 ]
Jegenhorst, Niels [1 ]
Kube, Raik [1 ]
Puettjer, Simon [1 ]
Riemschneider, K. -R. [1 ]
Vollmer, Juergen [1 ]
机构
[1] Hsch Angew Wissensch Hamburg, Hamburg, Germany
来源
2012 IEEE INTERNATIONAL INSTRUMENTATION AND MEASUREMENT TECHNOLOGY CONFERENCE (I2MTC) | 2012年
关键词
Automotive Battery Monitoring; Wireless Sensors; Electric Vehicles; Battery Sensors;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Systems monitoring lead acid vehicle batteries (starter batteries and forklift batteries) currently only observe the whole battery at the outer clamps. Common Lithium battery management systems measure each cell using complex wired solutions. This causes the serious galvanic isolation problems. The research project BATSEN proposes the use of wireless batteries cell sensors. This allows the separated integration inside each cell, avoids complex wire and connector systems, but above all there is no galvanic isolation problem. Therefore wireless sensors shall monitor each battery cell by measuring voltage and temperature. A central battery control unit will be used to combine the cell measurements with a current measurement and estimates the State of Charge (SOC) and the State of Health (SOH) of the battery. As a first step wireless sensors for lead acid batteries will be developed. In the future the sensors will also be applied in lithium batteries for electric or hybrid vehicles.
引用
收藏
页码:816 / 820
页数:5
相关论文
共 22 条
[1]  
Ansari J., 2008, IEEE PIMRC 2008
[2]  
Eger Torsten, 2008, THESIS HAW HAMBURG
[3]  
Finkenzeller K, 2008, RFID HDB, V5
[4]  
Hella KGaA Hueck & Co, ENG TECHN INF
[5]  
Ilgin S., 2011, 10 GI ITG KUVS FACHG, P73
[6]  
Ilgin Sergej, 2011, THESIS HAW HAMBURG
[7]  
Jegenhorst Niels, 2011, THESIS HAW HAMBURG
[8]  
Krannich T., 2009, 8 GI ITG KUVS FACHG, P91
[9]  
Krannich Tobias, 2008, THESIS HAW HAMBURG
[10]  
Kube Raik, 2011, THESIS HAW HAMBURG