Microstructural refinement process of pure magnesium by electromagnetic vibrations

被引:54
作者
Mizutani, Y [1 ]
Tamura, T [1 ]
Miwa, K [1 ]
机构
[1] Natl Inst Adv Ind Sci & Technol, AIST, Mat Res Inst Sustainable Dev, Moriyama Ku, Nagoya, Aichi 4638560, Japan
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2005年 / 413卷
基金
日本学术振兴会;
关键词
electromagnetic vibrations; grain refinement; pure magnesium; vibration frequency; solidification processing;
D O I
10.1016/j.msea.2005.09.009
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
A static magnetic field and an alternating electric field were simultaneously imposed during solidification of pure magnesium (99.9 mass%). The solidified crystal grains of magnesium were refined by the generated electromagnetic vibrations. The vibration frequency of about 500 Hz was most effective for the refinement of magnesium crystal grains in the frequency range from 60-5000 Hz during solidification. The crystal grains were refined at this frequency to approximately 200 mu m from about I mm in the nonvibrated state. At frequencies higher than 1000 Hz, the effect of grain refinement by the electromagnetic vibrations became weaker with increasing frequency, and most of these specimens consisted of coarse columnar crystals, unlike other specimens vibrated at lower frequencies. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:205 / 210
页数:6
相关论文
共 28 条
[1]   ACTION OF HIGH-INTENSITY ULTRASOUND ON SOLIDIFYING METAL [J].
ABRAMOV, OV .
ULTRASONICS, 1987, 25 (02) :73-82
[2]   Hypereutectic Al-Si based alloys with a thixotropic microstructure produced by ultrasonic treatment [J].
Abramov, VO ;
Abramov, OV ;
Straumal, BB ;
Gust, W .
MATERIALS & DESIGN, 1997, 18 (4-6) :323-326
[3]   CONTAINERLESS PROCESSING AND RAPID SOLIDIFICATION OF NB-SI ALLOYS IN THE NIOBIUM-RICH EUTECTIC RANGE [J].
BERTERO, GA ;
HOFMEISTER, WH ;
ROBINSON, MB ;
BAYUZICK, RJ .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1991, 22 (11) :2713-2721
[4]   Microstructure of nitrate polycrystals solidified under ultrasonic vibration [J].
Enomoto, N ;
Iimura, Y ;
Nakagawa, ZE .
JOURNAL OF MATERIALS RESEARCH, 1997, 12 (02) :371-376
[5]   BANDING PHENOMENA IN AL-FE ALLOYS SUBJECTED TO LASER SURFACE-TREATMENT [J].
GREMAUD, M ;
CARRARD, M ;
KURZ, W .
ACTA METALLURGICA ET MATERIALIA, 1991, 39 (07) :1431-1443
[6]   THE DEFORMATION AND AGEING OF MILD STEEL .3. DISCUSSION OF RESULTS [J].
HALL, EO .
PROCEEDINGS OF THE PHYSICAL SOCIETY OF LONDON SECTION B, 1951, 64 (381) :747-753
[7]   METALLURGICAL EFFECTS OF ULTRASONIC WAVES [J].
HIEDEMANN, EA .
JOURNAL OF THE ACOUSTICAL SOCIETY OF AMERICA, 1954, 26 (05) :831-842
[8]   Generation of compression waves by simultaneously imposing a static magnetic field and an alternating current and its use for refinement of solidified structure [J].
Kawai, S ;
Wang, Q ;
Iwai, K ;
Asai, S .
MATERIALS TRANSACTIONS JIM, 2001, 42 (02) :275-280
[9]   Development of an efficient grain refiner for Al-7Si alloy and its modification with strontium [J].
Kori, SA ;
Murty, BS ;
Chakraborty, M .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 283 (1-2) :94-104
[10]   Quantities of grains of aluminum and those of TiB2 and Al3Ti particles added in the grain-refining processes [J].
Lee, CT ;
Chen, SW .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2002, 325 (1-2) :242-248