The Investigation of Thrust Force of Printed Circuit Board Drilling

被引：8
|
作者：
Zheng, Lijuan [1 ]
Wang, Chengyong [1 ]
Qu, Yunpeng [1 ]
Yang, Lipeng [1 ]
Song, Yuexian [1 ]
机构：
[1] Guangdong Univ Technol, Guangzhou 510006, Guangdong, Peoples R China
来源：
PRECISION MACHINING VI | 2012年 / 496卷
关键词：
Drilling; PCB; Thrust force;
D O I：
10.4028/www.scientific.net/KEM.496.259
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This work is focused on the investigation of the influence of the materials of PCB, feed rate, spindle speed and tool wear on thrust force when drilling PCB using 0.3 mm diameter cemented tungsten carbide drills. The results indicate that thrust force increases with feed rate and drill wear, but decreases with spindle speed firstly and then increases with it within the cutting range tested. Thrust force caused by the copper foil is much larger than that caused by the epoxy glass fiber cloth when feed rate is low. However, the difference between them decreases as feed rate increases. The thickness of nail head increases with thrust force. The accuracy of hole location increases with thrust force firstly but decreases afterward. The influence of thrust force on hole wall roughness is not obvious.
引用
收藏
页码：259 / 265
页数：7
相关论文
共 50 条
  • [21] Investigation on thrust force in rotary ultrasonic drilling of CFRP using Brad drill
    Zheng, Kan
    Dong, Song
    Liao, Wenhe
    MACHINING SCIENCE AND TECHNOLOGY, 2019, 23 (06) : 971 - 984
  • [22] Experimental Investigation and Analysis of Thrust Force in Drilling Hybrid Metal Matrix Composites by Coated Carbide Drills
    Rajmohan, T.
    Palanikumar, K.
    MATERIALS AND MANUFACTURING PROCESSES, 2011, 26 (08) : 961 - 968
  • [23] Influence of drill geometry on thrust force in drilling GFRP composites
    Latha, B.
    Senthilkumar, V. S.
    Palanikumar, K.
    JOURNAL OF REINFORCED PLASTICS AND COMPOSITES, 2011, 30 (06) : 463 - 472
  • [24] Experimental Study of Thrust Force and Torque for Drilling Cortical Bone
    Sui, Jianbo
    Sugita, Naohiko
    ANNALS OF BIOMEDICAL ENGINEERING, 2019, 47 (03) : 802 - 812
  • [25] Testing and Modeling of Thrust Force and Torque in Drilling Recombinant Bamboo
    Li, Rongrong
    Ekevad, Mats
    Wang, Jie
    Guo, Xiaolei
    Cao, Pingxiang
    BIORESOURCES, 2014, 9 (04): : 7326 - 7335
  • [26] Prediction of thrust force and torque when drilling composite materials
    Bhatnagar, Naresh
    Jalutharia, Mukesh Kumar
    Singh, Inderdeep
    INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY, 2008, 32 (2-3) : 213 - 225
  • [27] Testing and modeling of thrust force and torque in drilling recombinant bamboo
    Cao, Pingxiang, 1600, North Carolina State University (09): : 7326 - 7335
  • [28] Experimental Study of Thrust Force and Torque for Drilling Cortical Bone
    Jianbo Sui
    Naohiko Sugita
    Annals of Biomedical Engineering, 2019, 47 : 802 - 812
  • [29] Identification of thrust force models for vibratory drilling
    Guibert, Nicolas
    Paris, Henri
    Rech, Joel
    Claudin, Christophe
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2009, 49 (09) : 730 - 738
  • [30] Experimental Investigation of Thrust Force in the Drilling of Titanium Alloy Using Different Machining Techniques
    Ma, Lijie
    Ma, Zunyan
    Yu, Hui
    Li, Shenwang
    Pang, Minghua
    Wang, Zhankui
    METALS, 2022, 12 (11)
12345