The Investigation of Thrust Force of Printed Circuit Board Drilling

被引：8
|
作者：
Zheng, Lijuan [1 ]
Wang, Chengyong [1 ]
Qu, Yunpeng [1 ]
Yang, Lipeng [1 ]
Song, Yuexian [1 ]
机构：
[1] Guangdong Univ Technol, Guangzhou 510006, Guangdong, Peoples R China
来源：
PRECISION MACHINING VI | 2012年 / 496卷
关键词：
Drilling; PCB; Thrust force;
D O I：
10.4028/www.scientific.net/KEM.496.259
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This work is focused on the investigation of the influence of the materials of PCB, feed rate, spindle speed and tool wear on thrust force when drilling PCB using 0.3 mm diameter cemented tungsten carbide drills. The results indicate that thrust force increases with feed rate and drill wear, but decreases with spindle speed firstly and then increases with it within the cutting range tested. Thrust force caused by the copper foil is much larger than that caused by the epoxy glass fiber cloth when feed rate is low. However, the difference between them decreases as feed rate increases. The thickness of nail head increases with thrust force. The accuracy of hole location increases with thrust force firstly but decreases afterward. The influence of thrust force on hole wall roughness is not obvious.
引用
收藏
页码：259 / 265
页数：7
相关论文
共 50 条
  • [11] A Review on Drilling Printed Circuit Boards
    Zheng, L. J.
    Wang, C. Y.
    Song, Y. X.
    Yang, L. P.
    Qu, Y. P.
    Ma, P.
    Fu, L. Y.
    HIGH SPEED MACHINING, 2011, 188 : 441 - +
  • [12] Experimental Investigation of Thrust Force, Delamination and Surface Roughness in Drilling Hybrid Structural Composites
    Shanmugam, Vigneshwaran
    Marimuthu, Uthayakumar
    Rajendran, Sundarakannan
    Veerasimman, Arumugaprabu
    Basha, Adamkhan Mahaboob
    Majid, Mohd Shukry Bin Abdul
    Neisiany, Rasoul Esmaeely
    Forsth, Michael
    Sas, Gabriel
    Razavi, Seyed Mohammad Javad
    Das, Oisik
    MATERIALS, 2021, 14 (16)
  • [13] Analytical modeling of thrust force and torque in drilling
    Naisson, Pierre
    Rech, Joel
    Paris, Henri
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2013, 227 (10) : 1430 - 1441
  • [14] Investigation on thrust force in rotary ultrasonic drilling of CFRP/aluminum stacks
    Dong, Song
    Liao, Wenhe
    Zhen, Kan
    Ma, Wenrui
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2020, 234 (02) : 394 - 404
  • [15] Experimental Investigation and Analysis on Thrust Force in Drilling of Wood Composite Medium Density Fiberboard Panels
    Palanikumar, K.
    Valarmathi, T. N.
    EXPERIMENTAL TECHNIQUES, 2016, 40 (01) : 391 - 400
  • [16] Experimental Investigation and Analysis on Thrust Force in Drilling of Wood Composite Medium Density Fiberboard Panels
    K. Palanikumar
    T. N. Valarmathi
    Experimental Techniques, 2016, 40 : 391 - 400
  • [17] The entry drilling process of flexible printed circuit board and its influence on hole quality
    Zheng, Lijuan
    Wang, Chengyong
    Zhang, Xin
    Song, Yuexian
    Zhang, Lunqiang
    Wang, Kefeng
    CIRCUIT WORLD, 2015, 41 (04) : 147 - 153
  • [18] Modeling of thrust force and torque in drilling aluminum 7050
    Aslan, Ebru
    Gurkan Kocatas, Duygu
    Uzun, Gultekin
    MATERIALS TESTING, 2024, 66 (04) : 513 - 525
  • [19] A Dynamic Thrust Force Prediction Model for Drilling of CFRP
    Cheng, Hui
    Li, Yuan
    Zhang, Kaifu
    Zhang, Jun
    MATERIALS PROCESSING TECHNOLOGY II, PTS 1-4, 2012, 538-541 : 1429 - 1432
  • [20] Removal force models for component disassembly from waste printed circuit board
    Yang, Jiping
    Xiang, Dong
    Wang, Jinsong
    Duan, Guanghong
    Zhang, Hong-Chao
    RESOURCES CONSERVATION AND RECYCLING, 2009, 53 (08) : 448 - 454
12345