Fabrication of SiC Nanoparticles by Physical Milling for Ink-Jet Printing

被引：3

作者：

Kim, Jong-Woong ^{[1
]}

Shim, Jae-Shik ^{[1
]}

Maeng, Changjun ^{[1
,3
]}

Kim, Young-Sung ^{[2
]}

Ahn, Jinho ^{[3
]}

Kwak, Min-Gi ^{[1
]}

Hong, Sung-Jei ^{[1
]}

Cho, Hyun-Min ^{[1
]}

机构：

[1] Korea Elect Technol Inst, Display Components & Mat Res Ctr, Songnam, Gyeonggi Do, South Korea

[2] Seoul Natl Univ Sci & Technol, Sch NID Fus Technol, Seoul, South Korea

[3] Hanyang Univ, Div Engn & Mat Sci, Seoul 133791, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2013年 / 13卷 / 08期

关键词：

Silicon Carbide; Nanoparticle; Ink-Jet Printing; Mechanical Milling; Digital Printing;

D O I：

10.1166/jnn.2013.7062

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

Here we tried to show the possibility of mechanical milling method for fabrication of SiC nanoparticles and ink-jet printing method to make SIC patterns for use as several applications, e.g., micro hotplates. Planetary milling was employed to fabricate the nano-scale SIC particles from coarse powders. After 100 hours of milling, the size of the SiC particles decreased to about 100 nm, which was sufficient for the formulation of ink for ink-jet printing. The SIC particles were dispersed in an ink system consisted of ethylene glycol and ethanol with a small amount of additives. The ink with SiC nanoparticles could be successfully printed on an alumina substrate by the ink-jet printing method.

引用

页码：5586 / 5589

页数：4