Use of the Impression Creep Test Method for Determining Minimum Creep Strain Rate Data

被引：0
|
作者：
Sun, W. [1 ]
Hyde, T. H. [1 ]
Brett, S. J. [1 ]
机构：
[1] Univ Nottingham, Dept Mech Mat & Mfg Engn, Nottingham NG7 2RD, England
来源：
DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT | 2012年
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In this paper, several technical and practical issues, related to the impression creep test technique, involving the conversion relationships between the impression creep data and the corresponding uniaxial data, and the application of the test method to iso-thermal and iso-load stepped test conditions, are discussed. Typical test results which validate the method are presented. Recent results obtained from P91 tests, at 650 degrees C, with different sized specimens, are presented. In addition, test results obtained from tests of specimens removed from a failed CrMoV uniaxial specimen (after > 40,000 hrs testing at 600 degrees C and 40 MPa) are presented. Future exploitation and improvements of the technique are briefly discussed.
引用
收藏
页码：297 / 304
页数：8
相关论文
共 50 条
  • [1] Analysis of the impression creep test method using a rectangular indenter for determining the creep properties in welds
    Hyde, TH
    Sun, W
    Becker, AA
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1996, 38 (10) : 1089 - 1102
  • [2] Minimum creep rate from primary creep using strain relaxation and recovery test
    Sinha, NK
    Terada, T
    Au, P
    SCRIPTA MATERIALIA, 2003, 49 (12) : 1145 - 1150
  • [3] A Small Creep Test Specimen for Use in Determining Uniaxial Creep Rupture Data
    Hyde, Thomas H.
    Sun, Wei
    Ali, Balhassn S. M.
    DETERMINATION OF MECHANICAL PROPERTIES OF MATERIALS BY SMALL PUNCH AND OTHER MINIATURE TESTING TECHNIQUES, 2ND INTERNATIONAL CONFERENCE SSTT, 2012, : 261 - 270
  • [4] IMPRESSION CREEP - NEW CREEP TEST
    CHU, SNG
    LI, JCM
    JOURNAL OF MATERIALS SCIENCE, 1977, 12 (11) : 2200 - 2208
  • [5] Application of the reference stress method for interpreting impression creep test data
    Hyde, TH
    Yehia, KA
    Becker, AA
    MATERIALS AT HIGH TEMPERATURES, 1995, 13 (03) : 133 - 138
  • [6] Limitations to the impression creep test
    Brett, S. J.
    Bridges, A.
    MATERIALS AT HIGH TEMPERATURES, 2025, 42 (01) : 78 - 87
  • [7] An evaluation of the capability of data conversion of impression creep test
    Cacciapuoti, Bianca
    Sun, Wei
    McCartney, D. Graham
    Morris, Andy
    Lockyer, Scott
    Ab Razak, Norhaida
    Davies, Catrin M.
    Hulance, Jeff
    MATERIALS AT HIGH TEMPERATURES, 2017, 34 (5-6) : 415 - 424
  • [8] DEVELOPMENT AND APPLICATION OF MINIMUM CREEP STRAIN RATE METAMODELING
    Vega, Ricardo
    Stewart, Calvin
    PROCEEDINGS OF THE ASME TURBO EXPO: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, 2019, VOL 7A, 2019,
  • [9] Strain Relaxation and Recovery Test (SRRT) on Waspaloy for Measuring Irreversible Strain Rate Equivalent to Minimum Creep Rate
    Sinha, N.K. (nirmal.sinha@nrc-cnrc.gc.ca), 1600, Canadian Aeronautics and Space Institute (49):
  • [10] Creep strength and minimum strain rate estimation from Small Punch Creep tests
    Holmstrom, S.
    Li, Y.
    Dymacek, P.
    Vacchieri, E.
    Jeffs, S. P.
    Lancaster, R. J.
    Omacht, D.
    Kubon, Z.
    Anelli, E.
    Rantala, J.
    Tonti, A.
    Komazaki, S.
    Naveena
    Bruchhausen, M.
    Hurst, R. C.
    Hahner, P.
    Richardson, M.
    Andres, D.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2018, 731 : 161 - 172
12345