Experimental investigations on bond strength between coconut fibre and concrete

被引：100
|
作者：
Ali, Majid [1 ]
Li, Xiaoyang [1 ]
Chouw, Nawawi [1 ]
机构：
[1] Univ Auckland, Auckland Mail Ctr, Dept Civil & Environm Engn, Auckland 1142, New Zealand
来源：
MATERIALS & DESIGN | 2013年 / 44卷
关键词：
Coconut fibre; Composite material; Bond strength; Fibre pretreatment and pull-out test; REINFORCED CONCRETE; MORTAR COMPOSITES; DURABILITY;
D O I：
10.1016/j.matdes.2012.08.038
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Effect of fibre embedment lengths, diameters, pretreatment conditions and concrete mix design ratios on the bond strength between single coconut fibre and concrete is investigated. Fibres are prepared and categorised manually. Fibre diameters are measured by a stereomicroscope. Fibre and concrete properties are also determined experimentally. The simplified equations are proposed for estimating the fibre tensile stress, elastic modulus and toughness. Single fibre pull-out tests are carried out to determine load-slippage curves with the help of an Instron tensile machine having load cell. Bond strength and energy required for fibre pullout are calculated from the experimental data. The results show that fibres have the maximum bond strength with concrete when (i) embedment length is 30 mm, (ii) fibres are thick, (iii) treated with boiling water, and (iv) concrete mix design ratio is 1:3:3. Similar effects are observed for energy required for fibre pullout. With the obtained knowledge, empirical equations are also developed to determine the bond strength and energy required for fibre pullout. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码：596 / 605
页数：10
相关论文
共 50 条
  • [21] A MODEL OF CALCULATING THE BOND STRENGTH BETWEEN REBARS AND CONCRETE CONSIDERING THE SOFTENING EFFECT OF CONCRETE
    Lan G.-Q.
    Wang Y.-H.
    Liu L.
    Liu X.
    Song M.-M.
    Gongcheng Lixue/Engineering Mechanics, 2022, 39 (09): : 234 - 241and256
  • [22] Experimental study of the interfacial bond strength between cementitious grout and normal concrete substrate
    Peng, Gang
    Niu, Ditao
    Hu, Xiaopeng
    Pan, Baoxue
    Zhong, Shuai
    CONSTRUCTION AND BUILDING MATERIALS, 2021, 273
  • [23] Experimental study on improving bamboo concrete bond strength
    Mali, Pankaj R.
    Datta, Debarati
    ADVANCES IN CONCRETE CONSTRUCTION, 2019, 7 (03) : 191 - 201
  • [24] Effects of confinements on the bond strength between concrete and corroded steel bars
    Lin, Hongwei
    Zhao, Yuxi
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 118 : 127 - 138
  • [25] EFFECT OF PIGMENTS ON BOND STRENGTH BETWEEN COLOURED CONCRETE AND STEEL REINFORCEMENT
    ASSAAD, J. O. S. E. P. H. J.
    MATTA, M. A. T. T. H. E. W.
    SAADE, J. A. D.
    ACTA POLYTECHNICA, 2022, 62 (02) : 248 - 261
  • [26] AN EXPERIMENTAL STUDY ON THE COMPRESSIVE STRENGTH OF CONCRETE AND BOND STRENGTH BETWEEN STEEL BARS AND CONCRETE EXPOSED TO ELEVATED TEMPERATURES UP TO 700 °C
    Bingoel, A. Ferhat
    Guel, Ruestem
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON THE CONCRETE FUTURE, 2008, : 83 - 90
  • [27] Influence of coir fibre and recycled aggregate on bond strength of pavement quality concrete
    Poongodi, K.
    Murthi, P.
    Revathi, P.
    MATERIALS TODAY-PROCEEDINGS, 2022, 61 : 400 - 405
  • [28] Bond behaviour between recycled aggregate concrete and glass fibre reinforced polymer bars
    Baena, M.
    Torres, L.
    Turon, A.
    Llorens, M.
    Barris, C.
    CONSTRUCTION AND BUILDING MATERIALS, 2016, 106 : 449 - 460
  • [29] Experimental study on the interfacial bond strength and energy dissipation capacity of steel and steel fibre reinforced concrete (SSFRC) structures
    Wu, Kai
    Chen, Feng
    Lin, Junfu
    Zhao, Jixiang
    Zheng, Huiming
    ENGINEERING STRUCTURES, 2021, 235
  • [30] An experimental investigation on effect of elevated temperatures on bond strength between externally bonded CFRP and concrete
    Attari, Behzad
    Tavakkolizadeh, Mohammadreza
    STEEL AND COMPOSITE STRUCTURES, 2019, 32 (05): : 559 - 569
12345