Finite Element Modeling Modification Of Solar Sweeper Frame Based On modal Testing

被引：0
|
作者：
Xian, Yu [1 ]
Guang, Yang [1 ]
机构：
[1] Jimei Univ, Coll Mech Engn, Xiamen 361021, Peoples R China
来源：
ADVANCED COMPOSITE MATERIALS, PTS 1-3 | 2012年 / 482-484卷
关键词：
finite element analysis; modal test; frequency; frame;
D O I：
10.4028/www.scientific.net/AMR.482-484.874
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
Frame of solar sweeper is complexly welded structure with thin steel plate. A three dimensional model of solar sweeper frame was bullied up in CATIA and finite element mesh was finished in Hypermesh. ANSYS program was applied to modal analysis. Connections and constraints of finite element model(FEM) would be modified through a comparison with modal testing results. It shows that analysis results of distributing tendency and concrete value ranges are coincident well with test results, the max and min error is 1.54% and 8.15% separately. From the results, it could be concluded that accurate dynamic response can be gained based on modified FEM.
引用
收藏
页码：874 / 877
页数：4
相关论文
共 50 条
  • [21] Finite Element Modelling and In Situ Modal Testing of an Offshore Wind Turbine
    Erfan Asnaashari
    Andy Morris
    Ian Andrew
    Wolfgang Hahn
    Jyoti K. Sinha
    Journal of Vibration Engineering & Technologies, 2018, 6 : 101 - 106
  • [22] Computational finite element model updating tool for modal testing of structures
    Sahin, Abdurrahman
    Bayraktar, Alemdar
    STRUCTURAL ENGINEERING AND MECHANICS, 2014, 51 (02) : 229 - 248
  • [23] Modal testing and finite element modelling of subsystem in hard disk drive
    Xu, LM
    Guo, N
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2003, 17 (04) : 747 - 764
  • [24] Rings in Taylor Spatial Frame: Mechanical testing and finite element analysis
    Zamani, Ahmad
    Zenios, Michalis
    Oyadiji, S. Olutunde
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART H-JOURNAL OF ENGINEERING IN MEDICINE, 2025, 239 (02) : 165 - 177
  • [25] Correlation of Structural Modal Properties of Go-Kart Frame Structure Using Different Type of Joint in Finite Element Modeling
    Abdullah, N. A. Z.
    Sani, M. S. M.
    Zaman, I.
    ADVANCED SCIENCE LETTERS, 2017, 23 (11) : 11315 - 11319
  • [26] Modal analysis and application based on finite element method
    Wu Shuqian
    Wu Guoqing
    Zhou Jingling
    Zhu Weinan
    FRONTIERS OF MECHANICAL ENGINEERING AND MATERIALS ENGINEERING II, PTS 1 AND 2, 2014, 457-458 : 1601 - 1604
  • [27] Modeling And Modification Of Converter Transformer Similarity Model Based On Finite Element And Similarity Theory
    Wang, Hao
    Zhang, Li
    Sun, Youliang
    Zhang, Zhuangzhuang
    Wang, Dong
    2022 4TH INTERNATIONAL CONFERENCE ON SMART POWER & INTERNET ENERGY SYSTEMS, SPIES, 2022, : 395 - 401
  • [28] The Design of Quadcopter Frame Based On Finite Element Analysis
    Wei, Pan
    Yang, ZiJian
    Wang, Quanzi
    PROCEEDINGS OF THE 3RD INTERNATIONAL CONFERENCE ON MECHATRONICS, ROBOTICS AND AUTOMATION (ICMRA 2015), 2015, 15 : 1353 - 1356
  • [29] Fracture testing and finite element modeling of pure titanium
    Paulino, GH
    Carpenter, RD
    Liang, WW
    Munir, ZA
    Gibeling, JC
    ENGINEERING FRACTURE MECHANICS, 2001, 68 (12) : 1417 - 1432
  • [30] Testing and finite element modeling of stressed skin diaphragms
    Liu, Yang
    Zhang, Qilin
    Qian, Weijun
    STEEL AND COMPOSITE STRUCTURES, 2007, 7 (01): : 35 - 52
12345