Hierarchical Power Management for DC Microgrid in islanding mode and Solid State Transformer Enabled Mode

A hierarchical power management scheme is proposed in this paper for a typical DC Microgrid. Different from other Microgrids, the DC Microgrid can interface to the distribution system by Solid-State transformer (SST). The hierarchical power management strategy includes three control levels: 1) primary control for DC Microgrid to implement distributed operation 2) secondary control for the DC Microgrid bus voltage recovery to achieve seamless mode switch 3) tertiary control to manage the battery charge and discharge. The DC Microgrid can operate in islanding mode, including the individual control for distributed renewable energy source (DRER) and distributed energy storage device (DESD). In addition, the DC microgrid can operate in SST-enabled mode to interface to the distribution system. The DC Micorgrid can seamlessly switch between islanding mode and SST-enable mode. The consideration of state of charge (SOC) for battery is also involved into the tertiary control. To this end, a lab test-bed is constructed to verify the system performance. Lastly, several typical case studies are carried out and the experimental results verify the proposed power management strategy.