Effects of split injection proportion and the second injection timings on the combustion and emissions of a dual fuel SI engine with split hydrogen direct injection

被引:33
|
作者
Li, Guanting [1 ]
Yu, Xiumin [1 ]
Shi, Weibo [1 ]
Yao, Chuanzhao [1 ]
Wang, Sen [1 ]
Shen, Qingxu [1 ]
机构
[1] Jilin Univ, State Key Lab Automot Simulat & Control, Renmin St 5988, Changchun 130022, Jilin, Peoples R China
基金
中国国家自然科学基金;
关键词
Dual-fuel engine; Combined injection; Hydrogen direct-injection; Split injection; Combustion; Emission; GDI ENGINE; PERFORMANCE; STRATEGY; DIESEL;
D O I
10.1016/j.ijhydene.2019.02.222
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
In this paper, a new kind of injection mode, split hydrogen direct injection, was presented for a dual fuel SI engine. Six different first injection proportions (IP1) and five different second injection timings were applied at the condition of excess air ratio of 1, first injection timing of 300 degrees CA BTDC, low speed, low load conditions and the Minimum spark advance for Best Torque (MBT) on a dual fuel SI engine with hydrogen direct injection (HDI) plus port fuel injection (PFI). The result showed that, split hydrogen direct injection can achieve a higher brake thermal efficiency and lower emissions compared with single HDI. In comparison with single HDI, the split hydrogen direct injection can form a controlled stratified condition of hydrogen which could make the combustion more complete and faster. By adding an early spray to form a more homogeneous mixture, the split hydrogen direct injection not only can help to form a flame kernel to make the combustion stable, but also can speed up the combustion rate through the whole combustion process, which can improve the brake thermal efficiency. By split hydrogen direct injection, the torque reaches the highest when the first injection proportion is 33%, which improves by 1.13% on average than that of single HDI. With the delay of second injection timing, the torque increases first and then decreases. With the increase of first injection proportion, the best second injection timing is advanced. Furthermore, by forming a more homogeneous mixture, the split hydrogen direct injection can reduce the quenching distance to reduce the HC emission and reduce the maximum temperature to reduce the NOx. The split hydrogen direct injection can reduce the HC emission by 35.8%, the NOx emissions by 7.3% than that of single HDI. (C) 2019 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:11194 / 11204
页数:11
相关论文
共 50 条
  • [41] Effects of the fuel injection ratio on the emission and combustion performances of the partially premixed charge compression ignition combustion engine applied with the split injection method
    Chung, J. W.
    Kang, J. H.
    Kim, N. H.
    Kang, W.
    Kim, B. S.
    INTERNATIONAL JOURNAL OF AUTOMOTIVE TECHNOLOGY, 2008, 9 (01) : 1 - 8
  • [42] Effects of the fuel injection ratio on the emission and combustion performances of the partially premixed charge compression ignition combustion engine applied with the split injection method
    J. W. Chung
    J. H. Kang
    N. H. Kim
    W. Kang
    B. S. Kim
    International Journal of Automotive Technology, 2008, 9 : 1 - 8
  • [43] Experimental Study on the Effects of Hydrogen Injection Strategy on the Combustion and Emissions of a Hydrogen/Gasoline Dual Fuel SI Engine under Lean Burn Condition
    Pan, Shiyi
    Wang, Jinhua
    Liang, Bin
    Duan, Hao
    Huang, Zuohua
    APPLIED SCIENCES-BASEL, 2022, 12 (20):
  • [44] Effects of port fuel injection (PFI) of n-butanol and EGR on combustion and emissions of a direct injection diesel engine
    Chen, Zheng
    Liu, Jingping
    Wu, Zhenkuo
    Lee, Chiafon
    ENERGY CONVERSION AND MANAGEMENT, 2013, 76 : 725 - 731
  • [45] Effect of a split-injection strategy on the performance of stratified lean combustion for a gasoline direct-injection engine
    Park, C.
    Kim, S.
    Kim, H.
    Lee, S.
    Kim, C.
    Moriyoshi, Y.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING, 2011, 225 (D10) : 1415 - 1426
  • [46] Split injection in a homogeneous stratified gasoline direct injection engine for high combustion efficiency and low pollutants emission
    Costa, M.
    Sorge, U.
    Merola, S.
    Irimescu, A.
    La Villetta, M.
    Rocco, V.
    ENERGY, 2016, 117 : 405 - 415
  • [47] Modeling of the fuel injection and combustion process in a CNG direct injection engine
    Choi, Mingi
    Song, Jingeun
    Park, Sungwook
    FUEL, 2016, 179 : 168 - 178
  • [48] Effects of Injection Timing and Injection Volume on the Combustion and Emissions of a Two-Stroke Kerosene Direct Injection Engine
    Bei, Taixue
    Lu, Bo
    Liu, Rui
    Huang, Junhui
    Zhang, Bing
    PROCESSES, 2022, 10 (09)
  • [49] Effect of Hydrogen-Rich Syngas Direct Injection on Combustion and Emissions in a Combined Fuel Injection-Spark-Ignition Engine
    Shang, Zhen
    Sun, Yao
    Yu, Xiumin
    He, Ling
    Ren, Luquan
    SUSTAINABILITY, 2023, 15 (11)
  • [50] The Effect of Injection Timings on Performance and Emissions of Compressed Natural-Gas Direct Injection Engine
    Aljamali, Saad
    Abdullah, Shahrir
    Mahmood, Wan Moh Faizal Wan
    Ali, Yusoff
    JOURNAL OF COMBUSTION, 2016, 2016