Damage mechanisms in aluminum-matrix composites reinforced with nano-alumina particles

被引：2
作者：
Ebrahimnejad, Azam [1 ]
Sajjadi, Seyed Abdolkarim [1 ]
机构：
[1] Ferdowsi Univ Mashhad, Dept Mat Sci & Engn, Mashhad, Iran
来源：
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH | 2015年 / 106卷 / 10期
关键词：
Al-matrix composite; Nano-alumina particles; Powder metallurgy; Damage mechanism; FRACTURE; AL2O3;
D O I：
10.3139/146.111277
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this research, an examination of the effects of fraction of particulate nano-sized alumina (0, 2, 5, 10, 15 and 20 wt.%) on the mechanical properties and fracture mechanism of Al-Al2O3 nano-composite has been carried out. The samples were uniaxially tested at room temperature and sample sections were analyzed using scanning electron microscopy. The results showed that the fracture mode of the composites was changed by volume fraction of the reinforcement particles. The main damage mechanisms observed in the specimens were clustering and microvoid formation, crack branching and crack deflection.
引用
收藏
页码：1107 / 1110
页数：4
相关论文
共 50 条
[21]   Microstructural analysis and mechanical characterization of aluminum matrix nanocomposites reinforced with uncoated and Cu-coated alumina particles [J].
Beygi, H. ;
Sajjadi, S. A. ;
Zebarjad, S. M. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2014, 607 :81-88
[22]   Mechanical, intergranular corrosion, and wear behavior of aluminum-matrix composite materials reinforced with nickel aluminides [J].
C. E. Da Costa ;
F. Velasco ;
J. M. Torralba .
Metallurgical and Materials Transactions A, 2002, 33 :3541-3553
[23]   On the strengthening and the strength reducing mechanisms at aluminium matrix composites reinforced with nano-sized TiCN particulates [J].
Anestiev, Lubomir ;
Lazarova, Rumyana ;
Petrov, Peter ;
Dyakova, Vanya ;
Stanev, Lenko .
PHILOSOPHICAL MAGAZINE, 2021, 101 (02) :129-153
[24]   Interface and strengthening mechanisms of Al matrix composites reinforced with in-situ CNTs grown on Ti particles [J].
Yang, C. M. Y. ;
Li, X. ;
Li, C. J. ;
Peng, Y. Z. ;
Xing, Y. ;
Feng, Z. X. ;
Tan, J. ;
Tao, J. M. ;
Li, Z. L. ;
Wang, Y. R. ;
Yu, B. H. ;
Yi, J. H. .
MATERIALS & DESIGN, 2023, 229
[25]   Preparation, mechanical properties and strengthening mechanisms of T15 particles reinforced Cu matrix composites [J].
Luo, Jiaqi ;
Xu, Tong ;
Qi, Xiaohui ;
Wang, Xinfu ;
Li, Xianyu ;
Wang, Dan ;
Hao, Gangling ;
Dai, Zeyu .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2024, 910
[26]   Processing and Manufacturing of Metal Matrix Aluminum Alloys Composites Reinforced by Silicon Carbide and Alumina Through Powder Metallurgy Techniques [J].
de Araujo, Everthon Rodrigues ;
Ferreira Alves, Servulo Jose ;
Ambrozio Filho, Francisco ;
Urtiga Filho, Severino Leopoldino ;
de Araujo Filho, Oscar Olimpio .
ADVANCED POWDER TECHNOLOGY VIII, PTS 1 AND 2, 2012, 727-728 :254-+
[27]   Enhanced mechanical behavior and fabrication of silicon carbide particles covered by in-situ carbon nanotube reinforced 6061 aluminum matrix composites [J].
Li, Shisheng ;
Su, Yishi ;
Zhu, Xinhai ;
Jin, Huiling ;
Ouyang, Qiubao ;
Zhang, Di .
MATERIALS & DESIGN, 2016, 107 :130-138
[28]   Processing and characterization of graphite nanofibers reinforced aluminum matrix composites [J].
Jang, JH ;
Oh, KH ;
Heo, SI ;
Han, KS .
FRACTURE AND STRENGTH OF SOLIDS VI, PTS 1 AND 2, 2006, 306-308 :1067-1072
[29]   Interfacial characterization in carbon nanotube reinforced aluminum matrix composites [J].
Housaer, F. ;
Beclin, F. ;
Touzin, M. ;
Tingaud, D. ;
Legris, A. ;
Addad, A. .
MATERIALS CHARACTERIZATION, 2015, 110 :94-101
[30]   Sensitivity Analysis of Reinforced Aluminum Based Metal Matrix Composites [J].
Gillani, Fouzia ;
Khan, Muhammad Zubair ;
Shah, Owaisur Rahman .
MATERIALS, 2022, 15 (12)
12345