Gap-free lap welding of zinc-coated steel using pulsed CO2 laser

CO2 laser welding of zinc-coated steel sheets in the lap configuration has been a major research effort for the automotive industry for many years. The introduction of a gap between the sheets is one way of solving the zinc gas explosion problem. However, this requires sophisticated clamping devices and spacer materials. A homogeneous gap is therefore difficult to realise in high volume production. This paper describes a simple but useful approach for CO2 laser welding of zinc-coated steel sheets in the lap configuration. By using a gated pulse mode, a seam welding process is developed that allows zinc-coated materials to be welded in a gap-free, overlap configuration. Laser seam welds in the lap configuration were produced in 0.7 mm-thick steel sheet with 7 mu m zinc coating on both sides. A number of pulsed CO2 laser welding parameters, including peak power, duty cycle, travel speed, pulse repetition rate, and pulse energy, were identified. Furthermore, the effects of pulsed CO2 laser welding parameters on weldability were also investigated. The study shows that through the proper selection of welding parameters, it is possible to produce visually sound welds where porosity is still unavoidably formed. It was observed that decreasing the welding speed could reduce the porosity within the visually sound welds.