Reinforcement of hydroxyapatite bioceramic by addition of Ti3SiC2

被引：20

作者：

Shi, SL ^{[1
]}

Pan, W ^{[1
]}

Fang, MH ^{[1
]}

Fang, ZY ^{[1
]}

机构：

[1] Tsing Hua Univ, Dept Mat Sci & Engn, State Key Lab New Ceram & Fine Proc, Beijing 100084, Peoples R China

来源：

JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 2006年 / 89卷 / 02期

关键词：

D O I：

10.1111/j.1551-2916.2005.00764.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Ti3SiC2/HAp composites with different Ti3SiC2 volume fractions were fabricated by spark plasma sintering (SPS) at 1200 degrees C. The effects of Ti3SiC2 addition on the mechanical properties and microstructures of the composites were investigated. The bending strength and fracture toughness of the composites increased with increasing of Ti3SiC2 content, whereas the Vickers hardness decreased. The bending strength and fracture toughness reached 252 +/- 10 MPa and 3.9 +/- 0.1 MPa.m(1/2), respectively, with the addition of 50 vol% Ti3SiC2. The increases in the mechanical properties were attributed to the matrix strengthening and interactions between cracks and the Ti3SiC2 platelets.

引用

页码：743 / 745

页数：3

共 50 条

[41] Fabrication and Properties of Ti3SiC2/SiC Composites
YIN Hongfeng
China'sRefractories, 2008, (01) : 10 - 13
[42] Microstructure and mechanical properties of Ti3SiC2/Ti3SiC2 diffusion bonded joints using Ti foil as an interlayer
Wang, Y.
Wu, X. F.
Yang, Z. W.
Xia, Y. H.
Wang, D. P.
CERAMICS INTERNATIONAL, 2019, 45 (16) : 20900 - 20909
[43] The effect of coarse and fine Ti3SiC2 particle reinforcement in aluminum matrix composites
Messer, Or
Ratzker, Barak
Shilo, Jacob T.
Kalabukhov, Sergey
Sokol, Maxim
JOURNAL OF ALLOYS AND COMPOUNDS, 2024, 976
[44] Contribution of plastic deformation of Ti3SiC2 to the crack deflection in the Al2O3/Ti3SiC2 composites
Chin, Yuan-Liang
Tuan, Wei-Hsing
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (7-8): : 3270 - 3274
[45] Toughening of Ti3SiC2 with 3Y-TZP addition by spark plasma sintering
Shi, Sui Lin
Pan, Wei
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 447 (1-2): : 303 - 306
[46] Dependence of the microstructure and properties of TiC/Ti3SiC2 composites on extra C addition
Wang, Jun
Li, Ai-Ju
Wang, Su-Mei
Zeng, Hai-Xia
CERAMICS INTERNATIONAL, 2012, 38 (07) : 5967 - 5971
[47] Effect of Al addition on low-temperature synthesis of Ti3SiC2 powder
Zou, Yong
Sun, ZhengMing
Tada, Shuji
Hashimoto, Hitoshi
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 461 (1-2) : 579 - 584
[48] Electrical and dielectric behaviors of Ti3SiC2/hydroxyapatite composites -: art. no. 052903
Shi, SL
Pan, W
Han, RB
Wan, CL
APPLIED PHYSICS LETTERS, 2006, 88 (05) : 1 - 2
[49] Sintering of SiC/Ti3SiC2 composites with high SiC contents *
Chahhou, B.
Roger, J.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (16) : 7314 - 7325
[50] Ti3SiC2陶瓷的制备
张俊才
贾成厂
朱景川
武万良
硅酸盐通报, 2008, (04) : 700 - 704

← 1 2 3 4 5 →