Mesoscopic simulation on curing deformation and residual stresses of 3D braided composites

被引：23

作者：

Fu, Yutong ^{[1
]}

Gao, Xuhao ^{[1
]}

Yao, Xuefeng ^{[1
]}

机构：

[1] Tsinghua Univ, Dept Engn Mech, Appl Mech Lab, Beijing 100084, Peoples R China

来源：

COMPOSITE STRUCTURES | 2020年 / 246卷

关键词：

EPOXY; CURE; EVOLUTION; KINETICS;

D O I：

10.1016/j.compstruct.2020.112387

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

Both cure deformations and residual stresses of 3D braided composites are studied based on the representative volume element (RVE) by means of thermochemical and thermodynamic model. First, the curing analysis model of cubic braided RVE is established, and the HETVAL, UMAT, UEXPAN and USDFLD subroutines are used to define the properties of the resin and the fiber about curing reaction kinetic, thermal conductive and viscoelastic model, respectively. Second, both thermochemical and thermodynamic behaviors of the RVE in 3D braided composites are simulated and analyzed which indicates the relationship among curing process, deformation and residual stress in mesoscopic scale. Finally, the influences of temperature rising rate and curing temperature on degree of curing, curing deformation and residual stresses of 3D braided composites under different curing process are investigated. These results will play an important role for designing curing technology and evaluating the residual stress in 3D braided composites. © 2020 Elsevier Ltd

引用

页数：13

共 36 条

[1] Micro- and meso-level residual stresses in glass-fiber/vinyl-ester composites [J].

Andersson, B ;

Sjögren, A ;

Berglund, L .

COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (10) :2011-2028

[2]

[Anonymous], 1997, THESIS

[3]

[Anonymous], THERMAL CHARACTERIZA

[4]

[Anonymous], ALBANY ENG COMPOS

[5]

[Anonymous], CONTINUUM MECH THERM

[6]

Bajpai A., 2019, J COMPOS SCI, V2, P1

[7] Experimental modeling of the cure kinetics of an epoxy-hexaanhydro-4-methylphthalicanhydride (MHHPA) system [J].

Boey, FYC ;

Qiang, W .

POLYMER, 2000, 41 (06) :2081-2094

[8] 2-DIMENSIONAL CURE SIMULATION OF THICK THERMOSETTING COMPOSITES [J].

BOGETTI, TA ;

GILLESPIE, JW .

JOURNAL OF COMPOSITE MATERIALS, 1991, 25 (03) :239-273

[9] Numerical multiscale homogenization approach for linearly viscoelastic 3D interlock woven composites [J].

Courtois, A. ;

Marcin, L. ;

Benavente, M. ;

Ruiz, E. ;

Levesque, M. .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2019, 163 :61-74

[10] Viscoelastic behavior of an epoxy resin during cure below the glass transition temperature: Characterization and modeling [J].

Courtois, Alice ;

Hirsekorn, Martin ;

Benavente, Maria ;

Jaillon, Agathe ;

Marcin, Lionel ;

Ruiz, Edu ;

Levesque, Martin .

JOURNAL OF COMPOSITE MATERIALS, 2019, 53 (02) :155-171

← 1 2 3 4 →