Optimization design and fabrication of annular field emitter for field emission display panel

被引：4
作者：
Wu, Chao [1 ]
Jin, Xiaofeng [2 ]
机构：
[1] Zhongyuan Inst Technol, Sch Elect Informat, Zhengzhou, Peoples R China
[2] Jiaozuo Univ, Inst Elect & Mech, Jiaozuo, Peoples R China
来源：
MATERIALS, MECHATRONICS AND AUTOMATION, PTS 1-3 | 2011年 / 467-469卷
关键词：
field emitter; electrode; cathode; fabrication; panel;
D O I：
10.4028/www.scientific.net/KEM.467-469.1520
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
With high-effective screen-printing technique, the diode field emission display (FED) panel with carbon nanotube (CNT) as cathode material was fabricated. For improving the field emission properties, the annular field emitter was developed. The bar cathode indium tin oxide (ITO) electrode was formed by the divided ITO film with the photolithography process. After the sintering process, the printed silver slurry was solidified to form the rectangular ring electrode. The prepared CNT paste was printed to form the cold cathode emitter. Field emission characteristics of sealed FED panel were measured, and the emission image was also presented. A series of low-cost manufacture process was employed in the device fabrication course. The fabricated FED panel exhibited better field emission performance and large emission current.
引用
收藏
页码：1520 / +
页数：2
相关论文
共 8 条
  • [1] Fabrication of micro-field emitters on ceramic substrates
    Chen, L.
    El-Gomati, M. M.
    [J]. MICROELECTRONIC ENGINEERING, 2007, 84 (01) : 95 - 100
  • [2] Shapes of emitter surface in field emission display
    Choi, Y. S.
    [J]. THIN SOLID FILMS, 2008, 516 (10) : 3357 - 3363
  • [3] Fabrication of field emission display prototype utilizing printed carbon nanotubes/nanofibers emitters
    Guo, P. S.
    Chen, T.
    Chen, Y. W.
    Zhang, Z. J.
    Feng, T.
    Wang, L. L.
    Lin, L. F.
    Sun, Z.
    Zheng, Z. H.
    [J]. SOLID-STATE ELECTRONICS, 2008, 52 (06) : 877 - 881
  • [4] Electron field emission from transparent multiwalled carbon nanotube sheets for inverted field emission displays
    Kuznetzov, Alexander A.
    Lee, Sergey B.
    Zhang, Mei
    Baughman, Ray H.
    Zakhidov, Anvar A.
    [J]. CARBON, 2010, 48 (01) : 41 - 46
  • [5] Li YK, 2002, DIAM RELAT MATER, V11, P1845, DOI 10.1016/S0925-9635(02)00171-1
  • [6] Fabrication of pixel array type FED device with carbon nanotube emitters
    Li, Yukui
    Xing, Wensheng
    [J]. ADVANCES IN LIQUID CRYSTALS, 2010, 428-429 : 413 - +
  • [7] Field emission properties of carbon nanotube cathodes produced using composite plating
    Wang, Fang-Hsing
    Lin, Tzu-Ching
    Tzeng, Shien-Der
    Chou, Ching-Tien
    [J]. APPLIED SURFACE SCIENCE, 2010, 256 (24) : 7600 - 7605
  • [8] The fabrication and operation of fully printed Carbon nanotube field emission displays
    Zeng, FG
    Zhu, CC
    Liu, WH
    Liu, XH
    [J]. MICROELECTRONICS JOURNAL, 2006, 37 (06) : 495 - 499
1