Deposition of diamond-like carbon films using plasma based ion implantation with bipolar pulses

被引：82

作者：

Miyagawa, S ^{[1
]}

Nakao, S ^{[1
]}

Ikeyama, M ^{[1
]}

Miyagawa, Y ^{[1
]}

机构：

[1] AIST, Natl Inst Adv Ind Sci & Technol, Moriyama Ku, Nagoya, Aichi 4638560, Japan

来源：

SURFACE & COATINGS TECHNOLOGY | 2002年 / 156卷 / 1-3期

关键词：

experimental methods; plasma based ion implantation; diamond-like carbon; internal stress; pulse plasma; inner coating;

D O I：

10.1016/S0257-8972(02)00101-9

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Plasma based ion implantation (PBII) with bipolar pulses has been proposed to improve a dose uniformity in an ion implantation on a three-dimensional target, A pulsed glow discharge plasma is produced around the target by a positive pulse at a gas pressure less that, similar to0.5 Pa, and then ions are implanted into the target from all sides by the subsequent negative high-voltage pulse. It has been shown that ions produced by the positive pulse have been implanted effectively with the negative pulse, The PBII with bipolar pulses is applied to DLC coatings. A carbon mixing layer in the substrate surface is formed by the implantation to improve the adhesion of DLC films. Internal stress of DLC films slightly decreases with increasing frequencies of positive pulse. Moreover. it is shown that the PBII with bipolar pulses is possible to use for inner coating of DLC films on a stainless-steel pipe. (C) 2002 Elsevier Science B.V. All rights reserved.

引用

页码：322 / 327

页数：6

共 50 条

[21] Preparation and properties of nitrogen and titanium oxide incorporated diamond-like carbon films by plasma source ion implantation
Baba, K
Hatada, R
SURFACE & COATINGS TECHNOLOGY, 2001, 136 (1-3) : 192 - 196
[22] Preparation of microstructure bodies in freestanding diamond-like carbon foil prepared using plasma-based ion implantation
Yamamoto, Ryoichi
Miyashita, Kiyoshi
Hayashi, Hiroshi
Inoue, Kazuhisa
DIAMOND AND RELATED MATERIALS, 2007, 16 (02) : 292 - 295
[23] Dynamic MC simulations of diamond-like carbon film synthesis by plasma-based ion implantation
Miyagawa, Y
Nakao, S
Ikeyama, M
Miyagawa, S
SURFACE & COATINGS TECHNOLOGY, 2001, 136 (1-3) : 122 - 126
[24] Adherent diamond-like carbon coatings on metals via plasma source ion implantation
Walter, KC
Nastasi, M
Munson, C
SURFACE & COATINGS TECHNOLOGY, 1997, 93 (2-3) : 287 - 291
[25] Conductivity of ion tracks in diamond-like carbon films
Zollondz, JH
Krauser, J
Weidinger, A
Trautmann, C
Schwen, D
Ronning, C
Hofsaess, H
Schultrich, B
DIAMOND AND RELATED MATERIALS, 2003, 12 (3-7) : 938 - 941
[26] Femtosecond pulsed laser deposition of diamond-like carbon films: The effect of double laser pulses
Jegenyes, N
Toth, Z
Hopp, B
Klebniczki, J
Bor, Z
Fotakis, C
APPLIED SURFACE SCIENCE, 2006, 252 (13) : 4667 - 4671
[27] Characteristics of diamond-like carbon film synthesized on AISI 304 austenite stainless steel using plasma immersion ion implantation and deposition
Liang, J. H.
Chen, M. H.
Tsai, W. F.
Lee, S. C.
Ai, C. F.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 2007, 257 (1-2 SPEC. ISS.) : 696 - 701
[28] Ferromagnetic order in diamond-like carbon films by Co implantation
Gupta, Prasanth
Williams, Grant
Markwitz, Andreas
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2016, 49 (05)
[29] Deposition and properties of Al-containing diamond-like carbon films by a hybrid ion beam sources
Dai, Wei
Wang, Aiying
JOURNAL OF ALLOYS AND COMPOUNDS, 2011, 509 (13) : 4626 - 4631
[30] Studies of diamond-like carbon films coated on PMMA by ion beam assisted deposition
Li, DJ
Cui, FZ
Gu, HQ
APPLIED SURFACE SCIENCE, 1999, 137 (1-4) : 30 - 37

← 1 2 3 4 5 →