Comparison on electrochemical corrosion performances of arc and laser thermal sprayed Al-Ti-Ni coatings in marine environment

被引:31
作者
Chen Haixiang [1 ]
Kong Dejun [1 ]
机构
[1] Changzhou Univ, Sch Mech Engn, Changzhou 213164, Peoples R China
关键词
Al-Ti-Ni coating; Arc spraying (AS); Laser thermal spraying (LTS); Marine environment; Electrochemical corrosion; HIGH-ENTROPY; BEHAVIOR; ALUMINUM; ALLOY; RESISTANCE; NACL; MICROSTRUCTURE; ZN; MECHANISM; SURFACE;
D O I
10.1016/j.matchemphys.2020.123200
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Al-Ti-Ni coatings were fabricated on S355 structural steel using an arc spraying (AS) and laser thermal spraying (LTS), and their electrochemical corrosion performances in 3.5% NaCl, 0.1 M H2SO4 and 0.1 M NaOH solutions were comparatively investigated. The results show that the obtained coatings are composed of crystalline and amorphous phases, and the metallurgical bonding is formed at the interface of laser thermal sprayed coating. The polarization resistance R-p and charge transfer resistance R-ct of laser thermal sprayed coating are higher than those of arc sprayed coating in 3.5% NaCl, 0.1 M H2SO4 and 0.1 M NaOH solutions, while the corrosion current density j(corr) is opposite, its electrochemical corrosion resistance is better than the arc sprayed coating. The R-p and R-ct of laser thermal sprayed coating in 0.1 M NaOH solution are the highest among the three kinds of solutions, showing the highest electrochemical corrosion resistance.
引用
收藏
页数:11
相关论文
共 44 条
[1]   Electrochemical corrosion behaviors of aluminum-based marine coatings in the presence of Escherichia coli bacterial biofilm [J].
Abdoli, Leila ;
Huang, Jing ;
Li, Hua .
MATERIALS CHEMISTRY AND PHYSICS, 2016, 173 :62-69
[2]   Corrosion performance of high pressure die-cast Al-Si-Mg-Zn alloys in 3.5 wt% NaCl solution [J].
Arthanari, Srinivasan ;
Jang, Jae Cheol ;
Shin, Kwang Seon .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 783 :494-502
[3]   Corrosion, Erosion and Wear Behavior of Complex Concentrated Alloys: A Review [J].
Ayyagari, Aditya ;
Hasannaeimi, Vahid ;
Grewal, Harpreet Singh ;
Arora, Harpreet ;
Mukherjee, Sundeep .
METALS, 2018, 8 (08)
[4]   Electrochemical corrosion of Ti-Al2O3 biocomposites in Ringer's solution [J].
Bahraminasab, Marjan ;
Bozorg, Mansoor ;
Ghaffari, Somaye ;
Kavakebian, Fatemeh .
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 777 :34-43
[5]   THE ANALYSIS OF ELECTRODE IMPEDANCES COMPLICATED BY THE PRESENCE OF A CONSTANT PHASE ELEMENT [J].
BRUG, GJ ;
VANDENEEDEN, ALG ;
SLUYTERSREHBACH, M ;
SLUYTERS, JH .
JOURNAL OF ELECTROANALYTICAL CHEMISTRY, 1984, 176 (1-2) :275-295
[6]   Electrochemical corrosion behavior of 2A02 Al alloy under an accelerated simulation marine atmospheric environment [J].
Cao, Min ;
Liu, Li ;
Yu, Zhongfen ;
Fan, Lei ;
Li, Ying ;
Wang, Fuhui .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2019, 35 (04) :651-659
[7]   In-situ synthesis of novel Al-Fe-Si metallic glass coating by arc spraying [J].
Cheng, Jiangbo ;
Wang, Baolei ;
Liu, Qi ;
Liang, Xiubing .
JOURNAL OF ALLOYS AND COMPOUNDS, 2017, 716 :88-95
[8]   Cored-wire arc spray fabrication of novel aluminium-copper coatings for anti-corrosion/fouling hybrid performances [J].
Fang, Lijia ;
Huang, Jing ;
Liu, Yi ;
Zhang, Botao ;
Li, Hua .
SURFACE & COATINGS TECHNOLOGY, 2019, 357 :794-801
[9]   Corrosion behaviour and galvanic coupling with steel of Al-based coating alternatives to electroplated cadmium [J].
Fasuba, O. A. ;
Yerokhin, A. ;
Matthews, A. ;
Leyland, A. .
MATERIALS CHEMISTRY AND PHYSICS, 2013, 141 (01) :128-137
[10]   Synthesis of nanocrystalline intermetallic compounds in Ni-Ti-Al system by mechanothermal method [J].
Gashti, S. O. ;
Shokuhfar, A. ;
Ebrahimi-Kahrizsangi, R. ;
Nasiri-Tabrizi, B. .
JOURNAL OF ALLOYS AND COMPOUNDS, 2010, 491 (1-2) :344-348