Formation and steady-state maintenance of field reversed configuration using rotating magnetic field current drive

Rotating magnetic fields (RMF) have been used to both form and maintain field reversed configurations (FRC) in quasisteady state. These experiments differ from steady-state rotamaks in that the FRCs are similar to those formed in theta-pinch devices, that is elongated and confined inside a flux conserver. The RMF creates an FRC by driving an azimuthal current which reverses an initial positive bias field. The FRC then expands radially, compressing the initial axial bias flux and raising the plasma density, until a balance is reached between the RMF drive force and the electron-ion friction. This generally results in a very high ratio of separatrix to flux conserver radius. The achievable final conditions are compared with simple analytic models to estimate the effective plasma resistivity. The RMF torque on the electrons is quickly transferred to the ions, but ion spin-up is limited in these low density experiments, presumably by ion-neutral friction, and does not influence the basic current drive process. However, the ion rotation can result in a rotating n=2 distortion if the separatrix radius is too far removed from the plasma tube wall. (C) 2002 American Institute of Physics.