Effect of SiC Particles on Structure Property and Wear Resistance of AA6061/SiC Surface Composite Fabricated Via Friction Stir Processing

被引：2
作者：
Paidar, M. [1 ]
Rasouli, M. [1 ]
Keneshloo, M. [1 ]
Babaei, H. [2 ]
机构：
[1] Islamic Azad Univ, South Tehran Branch, Dept Mat Engn, Tehran, Iran
[2] Islamic Azad Univ, South Tehran Branch, Dept Mech Engn, Tehran, Iran
来源：
POWDER METALLURGY AND METAL CERAMICS | 2019年 / 57卷 / 11-12期
关键词：
Al/SiC composite; friction stir processing; rotational speed; wear rate; MECHANICAL-PROPERTIES; ALUMINUM-ALLOY; PROCESS PARAMETERS; PIN PROFILE; MICROSTRUCTURE; TOOL;
D O I：
10.1007/s11106-019-00025-8
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
In the present study, the effect of the tool travel and rotational speed on structural properties and wear resistance of 6061Al/SiC surface composites produced via friction stir processing (FSP) has been investigated. It was found that when the rotational speed was increased from 630 to 2000 rpm or travel speed was reduced from 150 mm/min to 30 mm/min, the wear resistance improved. The enhancement of wear resistance was attributed to the desirable distribution of SiC particles in the base metal. Additionally, the obtained data indicate that a significant change in the reduction of the average grain size in the stir zone (SZ) is happened by increasing the rotational speed and decreasing the travel speed.
引用
收藏
页码：631 / 639
页数：9
相关论文
共 50 条
[41]   Mechanical, wear and corrosion behaviors of AZ91/SiC composite layer fabricated by friction stir vibration processing [J].
Abdollahzadeh, Amin ;
Bagheri, Behrouz ;
Abbasi, Mahmoud ;
Sharifi, Farzaneh ;
Ostovari Moghaddam, Ahmad .
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES, 2021, 9 (03)
[42]   Mechanical and wear performance of Al/SiC surface composite prepared through friction stir processing [J].
Butola, Ravi ;
Tyagi, Lakshay ;
Singari, Ranganath M. ;
Murtaza, Qasim ;
Kumar, Harish ;
Nayak, Dhiraj .
MATERIALS RESEARCH EXPRESS, 2021, 8 (01)
[43]   A comparative study on microstructural evolution and surface properties of graphene/CNT reinforced Al6061-SiC hybrid surface composite fabricated via friction stir processing [J].
Sharma, Abhishek ;
Sharma, Vyas Mani ;
Paul, Jinu .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2019, 29 (10) :2005-2026
[44]   Influence of grain structure evolution and microtexture development on hardness, residual stresses, and wear behavior of AA6061 alloy processed via cryogenic friction stir processing [J].
Karuppasamy, Arun K. ;
Reddy, K. Venkateswara ;
Shireesha, Yegireddi ;
Keshavamurthy, Ramaiah ;
Janaki, Durga, V ;
Chekuri, Rama B. R. ;
Satyanarayana, Marukurti V. N. V. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING, 2025,
[45]   Effect of Overlapping Friction Stir Processing on Microstructure, Mechanical Properties and Corrosion Behavior of AA6061 Alloy [J].
Satyanarayana, Marukurti V. N. V. ;
Adepu, Kumar ;
Chauhan, Karan .
METALS AND MATERIALS INTERNATIONAL, 2021, 27 (09) :3563-3573
[46]   Exploring the Influence of SiC Particles on Temperature Variations, Microstructural Evolution, and Mechanical Characteristics in the Friction Stir Processing of AA6061-T6 Plates [J].
Suman, Setu ;
Sethi, Durjyodhan ;
Acharya, Uttam ;
Roy, Barnik Saha .
SILICON, 2024, 16 (05) :2219-2231
[47]   Investigation on corrosion resistance of al6061/sic composite prepared with friction stir processing [J].
Zhang C.-C. ;
Wu H. ;
Yu X.-F. .
Surface Technology, 2021, 50 (05) :315-320
[48]   Enhanced strength, ductility, and corrosion resistance of AA6061/AA6082 alloys using Al-SiC matrix reinforcement in dissimilar friction stir welding [J].
Sabry, Ibrahim .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2025, 138 (5-6) :2431-2457
[49]   Microstructure and hardness performance of AA6061 aluminium composite using friction stir processing [J].
Marini, C. D. ;
Fatchurrohman, N. .
INTERNATIONAL CONFERENCE ON INNOVATIVE TECHNOLOGY, ENGINEERING AND SCIENCES 2018 (ICITES 2018), 2018, 342
[50]   Effect of dry sliding wear behaviour of AA6061/ZrB2/SiC Hybrid Composite [J].
Rajesh Ruban S. ;
Leo Dev Wins K. ;
David Raja Selvam J. ;
Arun Richard A. .
International Journal of Vehicle Structures and Systems, 2016, 8 (02) :108-111
12345