DICM and DCVM of a PFC-based SEPIC-fed PMBLDCM Drive

This paper deals with two different discontinuous conduction modes of a Power Factor Corrected (PFC) Single Ended Primary Inductor Converter (SEPIC) -fed Permanent Magnet Brushless DC Motor (PMBLDCM) Drive. A novel scheme of speed control of PFC-based SEPIC-fed PMBLDCM drive is proposed using a single voltage sensor. The SEPIC is operated in a Discontinuous Inductor Current Mode (DICM) and Discontinuous Capacitor Voltage Mode (DCVM) feeding PMBLDCM Drive. A Diode Bridge Rectifier (DBR) fed from a single-phase AC supply followed by a SEPIC DC-DC converter is used for power factor correction. A three-phase Voltage Source Inverter (VSI) is used for the electronic commutation of the PMBLDC motor. The speed control is achieved by controlling the DC link voltage of the VSI. A voltage follower approach is used to control the DC link voltage of the front-end SEPIC converter. The developed model of the system is used to simulate the performance of the drive system to achieve improved power quality at AC mains with a wide range of speed control.