Investigation of the flow field downstream of a turbine trailing edge cooled nozzle guide vane

被引:44
|
作者
Sieverding, CH [1 ]
Arts, T [1 ]
Denos, R [1 ]
Martelli, F [1 ]
机构
[1] UNIV FLORENCE,FLORENCE,ITALY
来源
JOURNAL OF TURBOMACHINERY-TRANSACTIONS OF THE ASME | 1996年 / 118卷 / 02期
关键词
D O I
10.1115/1.2836639
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A trailing edge cooled low aspect ratio transonic tur-bine guide vane is investigated in the VKI Compression Tube Cascade Facility at an outlet Mach number (M) over bar(2,is) = 1.05 and a coolant pow rate mc/mg = 3 percent. The outlet pow field is surveyed by combined total-directional pressure probes and temperature probes. Special emphasis is put on the development of low blockage probes. Additional information is provided by oil flow visualizations and numerical pow visualizations with a three-dimensional Navier-Stokes code. The test results describe the strong differences in the axial evolution of the hub and tip endwall and secondary flows and demonstrate the self-similarity of the midspan wake profiles. According to the total pressure and temperature profiles, the wake mixing appears to be very fast in the near-wake but very slow in the far-wake region. The total pressure wake profile appears to be little affected by the coolant flow ejection.
引用
收藏
页码:291 / 300
页数:10
相关论文
共 50 条
  • [1] Effects of hot steam injection from the slot at the trailing edge on turbine nozzle vane flow field
    Liang Xu
    Peigang Yan
    Hongyan Huang
    Wanjin Han
    Journal of Thermal Science, 2008, 17 : 298 - 304
  • [2] Effects of Hot Steam Injection from the Slot at the Trailing Edge on Turbine Nozzle Vane Flow Field
    Liang Xu Peigang Yan Hongyan Huang Wanjin Han School of Energy Science & Engineering
    Journal of Thermal Science, 2008, 17 (04) : 298 - 304
  • [3] Effects of Hot Steam Injection from the Slot at the Trailing Edge on Turbine Nozzle Vane Flow Field
    Xu, Liang
    Yan, Peigang
    Huang, Hongyan
    Han, Wanjin
    JOURNAL OF THERMAL SCIENCE, 2008, 17 (04) : 298 - 304
  • [4] INVESTIGATION OF THE FLOW FIELD ON A TRANSONIC TURBINE NOZZLE GUIDE VANE WITH RIM SEAL CAVITY FLOW EJECTION
    Pau, M.
    Paniagua, G.
    PROCEEDINGS OF ASME TURBO EXPO 2009, VOL 7, PTS A AND B, 2009, : 1119 - 1129
  • [5] Investigation of the Flow Field on a Transonic Turbine Nozzle Guide Vane With Rim Seal Cavity Flow Ejection
    Pau, M.
    Paniagua, G.
    JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2010, 132 (11): : 111101 - 1
  • [6] Flow Analysis of Combined Impingement and Film Cooled Gas Turbine Nozzle Guide Vane
    Kukutla, Pol Reddy
    Prasad, B. V. S. S. S.
    2016 IEEE AEROSPACE CONFERENCE, 2016,
  • [7] EXPERIMENTAL-STUDY OF THE FLOW FIELD BEHIND AN ANNULAR TURBINE NOZZLE GUIDE VANE WITH AND WITHOUT DOWNSTREAM ROTOR
    BOLETIS, E
    SIEVERDING, CH
    MECHANICAL ENGINEERING, 1984, 106 (05) : 97 - 97
  • [8] Numerical investigation of effects of damaged and repaired surfaces on flow behavior of nozzle vane trailing edge
    Khumhaeng, Siwanart
    Suksa, Thitapa
    Laohalertchai, Nutcha
    Chaiprasit, Benyapa
    Prapamonthon, Prasert
    Yin, Bo
    JOURNAL OF FLUID SCIENCE AND TECHNOLOGY, 2024, 19 (02):
  • [9] Cooling performance analysis of steam cooled gas turbine nozzle guide vane
    Wang, Wei
    Gao, Jianmin
    Shi, Xiaojun
    Xu, Liang
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 62 : 668 - 679
  • [10] UNSTEADY TURBINE RIM SEALING AND VANE TRAILING EDGE FLOW EFFECTS
    Monge-Concepcion, Ivan
    Siroka, Shawn
    Berdanier, Reid A.
    Barringer, Michael D.
    Thole, Karen A.
    Robak, Christopher
    PROCEEDINGS OF ASME TURBO EXPO 2021: TURBOMACHINERY TECHNICAL CONFERENCE AND EXPOSITION, VOL 5B, 2021,