A morphing-based scheme for large deformation analysis with stereo-DIC

被引:20
作者
Genovese, Katia [1 ]
Sorgente, Donato [1 ]
机构
[1] Univ Basilicata, Sch Engn, Potenza, Italy
关键词
Large deformation; Stereo Digital Image Correlation; Image morphing; Shape flattening; Superplastic sheet metal forming; DIGITAL IMAGE CORRELATION; SHEET-METAL; ELEMENT;
D O I
10.1016/j.optlaseng.2017.06.020
中图分类号
O43 [光学];
学科分类号
070207 ; 0803 ;
摘要
A key step in the DIC-based image registration process is the definition of the initial guess for the non-linear optimization routine aimed at finding the parameters describing the pixel subset transformation. This initialization may result very challenging and possibly fail when dealing with pairs of largely deformed images such those obtained from two angled-views of not-flat objects or from the temporal undersampling of rapidly evolving phenomena. To address this problem, we developed a procedure that generates a sequence of intermediate synthetic images for gradually tracking the pixel subset transformation between the two extreme configurations. To this scope, a proper image warping function is defined over the entire image domain through the adoption of a robust feature-based algorithm followed by a NURBS-based interpolation scheme. This allows a fast and reliable estimation of the initial guess of the deformation parameters for the subsequent refinement stage of the DIC analysis. The proposed method is described step-by-step by illustrating the measurement of the large and heterogeneous deformation of a circular silicone membrane undergoing axisymmetric indentation. A comparative analysis of the results is carried out by taking as a benchmark a standard reference-updating approach. Finally, the morphing scheme is extended to the most general case of the correspondence search between two largely deformed textured 3D geometries. The feasibility of this latter approach is demonstrated on a very challenging case: the full-surface measurement of the severe deformation (> 150% strain) suffered by an aluminum sheet blank subjected to a pneumatic bulge test. (C) 2017 Elsevier Ltd. All rights reserved.
引用
收藏
页码:159 / 172
页数:14
相关论文
共 40 条
[1]  
[Anonymous], 2002, CARDIOVASCULAR SOLID, DOI DOI 10.1007/978-0-387-21576-1
[2]   Bulge testing under constant and variable strain rates of superplastic aluminium alloys [J].
Banabic, D ;
Vulcan, M .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2005, 54 (01) :205-208
[3]   A Fast Iterative Digital Volume Correlation Algorithm for Large Deformations [J].
Bar-Kochba, E. ;
Toyjanova, J. ;
Andrews, E. ;
Kim, K. -S. ;
Franck, C. .
EXPERIMENTAL MECHANICS, 2015, 55 (01) :261-274
[4]  
Beier T, P 19 ANN C COMP GRAP
[5]   Full-field speckle pattern image correlation with B-spline deformation function [J].
Cheng, P ;
Sutton, MA ;
Schreier, HW ;
McNeill, SR .
EXPERIMENTAL MECHANICS, 2002, 42 (03) :344-352
[6]   3D surface measurements with isogeometric stereocorrelation-Application to complex shapes [J].
Dufour, John-Eric ;
Leclercq, Sylvain ;
Schneider, Julien ;
Roux, Stephane ;
Hild, Francois .
OPTICS AND LASERS IN ENGINEERING, 2016, 87 :146-155
[7]   A 360-deg Digital Image Correlation system for materials testing [J].
Genovese, K. ;
Cortese, L. ;
Rossi, M. ;
Amodio, D. .
OPTICS AND LASERS IN ENGINEERING, 2016, 82 :127-134
[8]  
Genovese K., 2014, P ROY SOC A-MATH PHY, V470, P470
[9]   High-temperature strain field measurement using digital image correlation [J].
Grant, B. M. B. ;
Stone, H. J. ;
Withers, P. J. ;
Preuss, M. .
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2009, 44 (04) :263-271
[10]  
Humphrey J. D., 1998, Comput Methods Biomech Biomed Engin, V1, P171, DOI 10.1080/01495739808936701