Green fab lab applications of large-area waste polymer-based additive manufacturing

被引:78
作者
Byard, Dennis J. [1 ]
Woern, Aubrey L. [1 ]
Oakley, Robert B. [2 ]
Fiedler, Matthew J. [2 ]
Snabes, Samantha L. [2 ]
Pearce, Joshua M. [3 ,4 ,5 ]
机构
[1] Michigan Technol Univ, Dept Mech Engn Engn Mech, Houghton, MI 49931 USA
[2] Re 3D Inc, 1100 Hercules STE 220, Houston, TX USA
[3] Michigan Technol Univ, Dept Mat Sci & Engn, Houghton, MI 49931 USA
[4] Michigan Technol Univ, Dept Elect & Comp Engn, Houghton, MI 49931 USA
[5] Aalto Univ, Sch Elect Engn, Dept Elect & Nanoengn, Espoo, Finland
基金
美国国家科学基金会;
关键词
Polymers; Recycling; Waste plastic; Upcycle; Circular economy; CIRCULAR ECONOMY; 3D; RECYCLEBOT; DESIGN; VIRGIN;
D O I
10.1016/j.addma.2019.03.006
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Fab labs, which offer small-scale distributed digital fabrication, are forming a Green Fab Lab Network, which embraces concepts of an open source symbiotic economy and circular economy patterns. With the use of industrial 3D printers capable of fused particle fabrication/fused granular fabrication (FPF/FGF) printing directly from waste plastic streams, green fab labs could act as defacto recycling centers for converting waste plastics into valuable products for their communities. Clear financial drivers for this process have not been studied in the past. Thus, in this study the Gigabot X, an open source industrial 3D printer, which has been shown to be amenable to a wide array of recyclables for FPF/FGF 3D printing, is used to evaluate this economic potential. An economic life cycle analysis of the technology is completed comprised of three cases studies using FPF for large sporting equipment products. Sensitivities are run on the electricity costs for operation, materials costs from various feed stocks and the capacity factors of the 3D printers. The results showed that FPF/FGF 3D printing is capable of energy efficient production of a wide range of large high-value sporting goods products. In all cases, a substantial economic savings was observed when comparing the materials and energy related costs to commercial goods (even for customized goods). Using locally-sourced shredded plastic represented not only the best environmental option, but also the most economic. For the case study products analyzed even the lowest capacity factor (starting only one print per week) represented a profit when comparing to high-end value products. For some products the profit potential and return on investment was substantial (e.g. over 1000%) for high capacity use of a Gigabot X. The results clearly show that open source industrial FPF/FGF 3D printers have significant economic potential when used as a distributed recycling/manufacturing system using recyclable feed stocks in the green fab lab context.
引用
收藏
页码:515 / 525
页数:11
相关论文
共 81 条
[1]   Mechanical Properties of Specimens 3D Printed with Virgin and Recycled Polylactic Acid [J].
Anderson, Isabelle .
3D PRINTING AND ADDITIVE MANUFACTURING, 2017, 4 (02) :110-115
[2]  
[Anonymous], 2013, MRS P, DOI DOI 10.1557/0PL.2013.319
[3]  
[Anonymous], ROBOTICA
[4]  
[Anonymous], DES J
[5]  
[Anonymous], MECHATRONICS
[6]  
[Anonymous], MANAGING HUMANITARIA
[7]  
[Anonymous], PARTDADDY LARGE FORM
[8]  
[Anonymous], LARGE SCALE RECYCLED
[9]  
[Anonymous], WE NEED MAKE ALMOST
[10]  
[Anonymous], NATURE