Dissimilar joining of TC4 alloy to ST16 steel by GTAW

被引:28
作者
Hao, Xiaohu [1 ]
Dong, Honggang [1 ]
Li, Peng [1 ]
Xia, Yueqing [1 ]
机构
[1] Dalian Univ Technol, Sch Mat Sci & Engn, Dalian 116024, Peoples R China
基金
中国博士后科学基金; 中国国家自然科学基金;
关键词
Titanium alloy; Steel; Welding; Microstructure; Intermetallics; Strength; ELECTRON-BEAM; TITANIUM; TI-6AL-4V; COPPER;
D O I
10.1016/j.jmapro.2018.12.016
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The feasibility of direct fusion welding of TC4 alloy to ST16 steel by GTAW using CuSi3 filler wire was investigated. Defect-free fusion welded joints were obtained. Various intermetallic compounds, such as Ti2Cu, TiCu, AlCu2Ti, TiCu2 and Ti5Si3 phases, orderly formed in Ti/weld transition zone. Ti and Si diffused into ST16 steel, and an interface formed between copper weld and ST16 steel substrate. The resultant joints fractured at the ST16 steel substrate, and the tensile strength reached 282 MPa. The formation of various TixCuy IMCs and the solution strengthening induced by diffusion of Ti and Si led to the increase of microhardness in Ti/weld transition zone and copper/steel interface, respectively.
引用
收藏
页码:413 / 417
页数:5
相关论文
共 16 条
[1]   Influence of CeO2 on tribological behaviour of TiC/Fe-based composite coating [J].
Cai, Yangchuan ;
Luo, Zhen ;
Chen, Yao ;
Ao, Sansan .
SURFACE ENGINEERING, 2017, 33 (12) :936-943
[2]   Study on cold metal transfer welding-brazing of titanium to copper [J].
Cao, R. ;
Feng, Z. ;
Lin, Q. ;
Chen, J. H. .
MATERIALS & DESIGN, 2014, 56 :165-173
[3]   Joining of CP-Ti/Q345 sheets by Cu-based filler metal and effect on interface [J].
Chu, Qiaoling ;
Zhang, Min ;
Li, Jihong ;
Fan, Qingyang ;
Xie, Weiwei ;
Bi, Zongyue .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 225 :67-76
[4]   Direct Friction Welding of TiAl Alloy to 42CrMo Steel Rods [J].
Dong, Honggang ;
Yu, Lianzhen ;
Deng, Dewei ;
Zhou, Wenlong ;
Dong, Chuang .
MATERIALS AND MANUFACTURING PROCESSES, 2015, 30 (09) :1104-1108
[5]   Characterisation of laser welded dissimilar Ti/steel joint using Mg interlayer [J].
Gao, M. ;
Mei, S. W. ;
Wang, Z. M. ;
Li, X. Y. ;
Zeng, X. Y. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2012, 17 (04) :269-276
[6]   Laser-Arc Hybrid Welding of Dissimilar Titanium Alloy and Stainless Steel Using Copper Wire [J].
Gao, Ming ;
Chen, Cong ;
Wang, Lei ;
Wang, Zemin ;
Zeng, Xiaoyan .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (05) :2007-2020
[7]  
Gnyusov S. F., 2013, Welding International, V27, P295, DOI 10.1080/09507116.2012.715908
[8]   Characteristics of pure-titanium and low carbon steel friction-welded joint with post-weld heat-treatment [J].
Kimura, Masaaki ;
Fuji, Akiyoshi .
MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (10) :1016-1024
[9]   Improving the Interfacial Microstructure Evolution of Ti/Stainless Steel GTA Welding Joint by Employing Cu Filler Metal [J].
Liu, Kun ;
Li, Yajiang ;
Wang, Juan .
MATERIALS AND MANUFACTURING PROCESSES, 2016, 31 (16) :2165-2173
[10]   Copper Interlayer Contribution on Nd:YAG Laser Welding of Dissimilar Ti-6Al-4V Alloy with X5CrNi18-10 Steel [J].
Mitelea, I. ;
Groza, C. ;
Craciunescu, C. .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (08) :2219-2223