Structure and wear resistance of electron-beam nitrous coatings

被引:2
作者
Narkevich, N. A. [1 ]
Tagil'tseva, D. N. [1 ]
Durakov, V. G. [1 ]
Shulepov, I. A. [2 ]
Ivanova, E. A. [2 ]
机构
[1] Russian Acad Sci, Siberian Branch, Inst Strength Problems & Mat Sci, Tomsk 634021, Russia
[2] Tomsk Polytech Univ, Tomsk 634050, Russia
基金
俄罗斯基础研究基金会;
关键词
nitrous coatings; electron-beam facing; abrasive wear; frictional hardening; local structural-phase transformations; AUSTENITIC STEEL;
D O I
10.3103/S106836661205008X
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
The paper deals with the study of the tribological properties of nitrogen-containing austenite coatings deposited by electron-beam facing during abrasive wear and the sliding friction of a VK6 hard alloy indentor. The abrasive wear resistance of the nitrous coatings deposited by the electron-beam facing of steel 60Kh24AG16 powder in quartz sand is lower than that of the steel 65G coatings after hardening; it increases with increasing mass share of the filler. At contents of nitrided ferrovanadium of 10-30 wt % the abrasive wear rate increases by 30-50%, respectively. It is found that under a certain load applied to the VK6 ball indentor the friction coefficient and the shear resistance of the surface layer diminish. It is shown that under heavy specific loads applied to the ball indentor the nitrous coating faced from steel 60Kh24AG16 powder and composite nitrous coatings have wear resistance exceeding that of steels 110G13 and Kh18N10 by more than two and seven times, respectively. Based on the results of structural studies an explanation of the observed behavior of the nitrous coatings is proposed.
引用
收藏
页码:374 / 380
页数:7
相关论文
共 50 条
[41]   Role of the strengthening phases in abrasive wear resistance of laser-clad NiCrBSi coatings [J].
Makarov, A. V. ;
Soboleva, N. N. ;
Malygina, I. Yu .
JOURNAL OF FRICTION AND WEAR, 2017, 38 (04) :272-278
[42]   Development and assimilation of an electron-beam deposition process for strengthening and restoration of metallurgical-equipment components [J].
S. I. Belyuk ;
V. F. Shevchenko ;
N. K. Gal’chenko ;
V. P. Samartsev ;
K. A. Kolesnikova .
Metallurgist, 2007, 51 :516-525
[43]   Development and assimilation of an electron-beam deposition process for strengthening and restoration of metallurgical-equipment components [J].
Belyuk, S. I. ;
Shevchenko, V. F. ;
Gal'chenko, N. K. ;
Samartsev, V. P. ;
Kolesnikova, K. A. .
METALLURGIST, 2007, 51 (9-10) :516-525
[44]   On enhancing wear resistance of titanium alloys by laser cladded WC-Co composite coatings [J].
Jiang, Chaoping ;
Zhang, Jun ;
Chen, Yongnan ;
Hou, Zhimin ;
Zhao, Qinyang ;
Li, Yao ;
Zhu, Lixia ;
Zhang, Fengying ;
Zhao, Yongqing .
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2022, 107
[45]   Enhancing the wear resistance of WC-Co cutting inserts using synthetic diamond coatings [J].
Najar, Kaleem Ahmad ;
Sheikh, N. A. ;
Butt, Mohammad Mursaleen ;
Shah, M. A. .
INDUSTRIAL LUBRICATION AND TRIBOLOGY, 2018, 70 (07) :1224-1233
[46]   Characterization and Optimization of Boride Coatings on AISI 1137 Steel: Enhancing Surface Properties and Wear Resistance [J].
Genc, Asim ;
Urtekin, Levent ;
Danismaz, Merdin .
COATINGS, 2025, 15 (01)
[47]   Comparative Study of the Wear Resistance of Three Metal Cored Wire Welded Coatings Used in Industry [J].
de Melo Leite, Ricardo Vinicius ;
Marques, Paulo Villani .
SOLDAGEM & INSPECAO, 2009, 14 (04) :329-335
[48]   Effect of the structure of chromium-vanadium white irons on their wear resistance [J].
G. I. Silman ;
E. A. Pamfilov ;
S. S. Gryadunov ;
A. I. Gruvman .
Metal Science and Heat Treatment, 2007, 49 :405-408
[49]   COMPARISON OF ABRASIVE WEAR RESISTANCE BETWEEN HVOF THERMALLY SPRAYED ALLOY-BASED AND CERMET COATINGS [J].
Cesanek, Zdenek ;
Houdkova, Sarka ;
Schubert, Jan ;
Kasparova, Michaela .
METAL 2013: 22ND INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS, 2013, :1039-1044
[50]   Abrasive wear resistance of Fe3Al and Stellite 6 coatings for the protection of valve faces [J].
Szczucka-Lasota, Bozena ;
Wegrzyn, Tomasz ;
Tarasiuk, Wojciech ;
Cybulko, Piotr .
CONTINUUM MECHANICS AND THERMODYNAMICS, 2024, 36 (05) :1129-1145