Microwave-assisted hydrothermal synthesis of lithium-rich layered oxide cathode materials with high stability

Lithium-rich layered oxides have the advantages of high specific capacity (> 250 mAh g(-1)) and high energy density, which make them highly competitive in the lithium-ion cathode material market. However, low efficiency, poor cycle stability, and poor rate performance severely constrained their development. In this paper, the spherical lithium-rich Li(1.2)Mn(0.54)Ni(0.13)Co(0.13)O(2)compound was rapidly synthesized by microwave hydrothermal method, and the microwave hydrothermal time was optimized. The samples were characterized and analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD), Raman spectroscopy (Raman), and X-ray photoelectron spectroscopy (XPS). The prepared lithium-rich compound is porous spherical secondary particles, of which the size distributed between 2.5 and 3.5 mu m, which makes materials have larger specific surface area and active potential and promotes the improvement of electrochemical kinetics. The results of 100 charge-discharge cycles show that the microwave hydrothermal 40-min cathode has good stability, and the capacity retention rate can reach 91.4%. Furthermore, it can still provide a discharge capacity of 160.5 mAh g(-1)at a current density of 5 C.