Long-term monitoring of SIDD Type IV installations

An evaluation of the standard installation direct design (SIDD) prediction method has been undertaken by constructing and monitoring full-scale test beds installed according to SIDD Type IV specifications at four test sites across southern Ontario, Canada. Stresses around the test beds were monitored over a period of 20 months. The internal diameter of the test pipe segments varied from 600 mm to 900 mm; in situ soil conditions ranged from organic clay to sand, and burial depths varied from 1.5 to 3 times the diameter of the installed pipe. All test sections were subjected to frequent heavy traffic loads, representing a worse case loading scenario. Measurements from the 20 month monitoring period were compared with predictions from Ontario Provincial Standards and SIDD specifications. It was concluded that the SIDD method reasonably predicts the stress envelope around a buried rigid pipe installed using the cut-and-cover construction method. The indirect design method currently used by the Ontario Provincial Standards was found to provide an overly conservative prediction of soil stresses at the invert of the pipe.. Field measurements also suggest that the value of the horizontal arching factor (HAF) currently recommended by SIDD for Type IV installations is overly conservative and can be increased while maintaining a conservative design approach.