PVDF Sensor Foils Employed to Measure Shear Stress and Temperature of Friction Welding

被引:6
作者
Zou, Wei [1 ]
Schomburg, Werner Karl [1 ]
机构
[1] Rhein Westfal TH Aachen, KEmikro, Campus Blvd 30, D-52074 Aachen, Germany
关键词
PVDF sensor; piezoelectric; pyroelectric; shear stress; temperature; friction welding; HEAT-GENERATION; STRENGTH; PYROELECTRICITY;
D O I
10.3390/s20164565
中图分类号
O65 [分析化学];
学科分类号
070302 ; 081704 ;
摘要
Friction welding is a popular process for joining metal and polymer work pieces by rubbing them against each other. This way, friction heat is generated in a zone of the faying surfaces, thinner than 1 mm. After cooling down, the heated surfaces establish a tight and strong bond. To improve this joining process, a method is desirable allowing measuring generated temperature and shear stress in the zone between the joining work pieces. Unfortunately, this is a very difficult task because the welding zone cannot be accessed with a sensor without significantly altering the process and thereby the desired measurement results. This paper describes how shear stress and temperature change generated by rubbing polymer pieces in a friction welding machine have been measured between the faying surfaces by employing sensor foils from the piezoelectric and pyroelectric polymer polyvinylidene fluoride (PVDF). This way, heating and cooling rates, pressure rise of the pneumatic system, frequency rise of the starting machine, the duration of starting and stopping, the damping of the vibrations after the drive was stopped, and the stress generated by the pullback of the machine head have been measured. A careful characterization of the sensor was necessary to enable distinguishing the measured voltage due to straining, shearing and temperature change.
引用
收藏
页码:1 / 20
页数:20
相关论文
共 35 条
[1]   PYROELECTRICITY AND OPTICAL SECOND HARMONIC GENERATION IN POLYVINYLIDENE FLUORIDE FILMS [J].
BERGMAN, JG ;
MCFEE, JH ;
CRANE, GR .
APPLIED PHYSICS LETTERS, 1971, 18 (05) :203-&
[2]   Solid state joining of metals by linear friction welding: a literature review [J].
Bhamji, I. ;
Preuss, M. ;
Threadgill, P. L. ;
Addison, A. C. .
MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (01) :2-12
[3]   Separation of the pyro- and piezoelectric response of electroactive polymers for sensor applications [J].
Castro, H. F. ;
Lanceros-Mendez, S. ;
Rocha, J. G. .
ADVANCED MATERIALS FORUM III, PTS 1 AND 2, 2006, 514-516 :202-206
[4]   A Review on Inertia and Linear Friction Welding of Ni-Based Superalloys [J].
Chamanfar, Ahmad ;
Jahazi, Mohammad ;
Cormier, Jonathan .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (04) :1639-1669
[5]   Investigation of heat generation in ultrasonic metal welding using micro sensor arrays [J].
Cheng, Xudong ;
Li, Xiaochun .
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (02) :273-282
[6]  
Chudikov A.I., 1956, Russian Patent, Patent No. [RU106270, 106270]
[7]   FRICTIONAL HEAT GENERATED IN THE EARLY STAGES OF AN ORBITAL FRICTION WELDING PROCESS [J].
CRAINE, RE ;
FRANCIS, A .
WEAR, 1987, 114 (03) :355-365
[8]   FRICTION WELDING [J].
CROSSLAND, B .
CONTEMPORARY PHYSICS, 1971, 12 (06) :559-+
[9]   Development of a piezoelectric polymer film sensor for plantar normal and shear stress measurements [J].
Karki, Satu ;
Lekkala, Jukka ;
Kuokkanen, Hannu ;
Halttunen, Jouko .
SENSORS AND ACTUATORS A-PHYSICAL, 2009, 154 (01) :57-64
[10]   PIEZOELECTRICITY OF POLY (VINYLIDENE FLUORIDE) [J].
KAWAI, H .
JAPANESE JOURNAL OF APPLIED PHYSICS, 1969, 8 (07) :975-&