Influence of the microstructure on the tensile and impact properties of a 14Cr ODS steel bar

被引:43
|
作者
Garcia-Junceda, A. [1 ]
Hernandez-Mayoral, M. [1 ]
Serrano, M. [1 ]
机构
[1] CIEMAT, Struct Mat Div, Dept Technol, Madrid 28040, Spain
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2012年 / 556卷
关键词
ODS ferritic steel; Anisotropy; Delamination; Tensile test; Charpy impact test; STRENGTHENED FERRITIC STEELS; MECHANICAL-PROPERTIES; ALLOYS; TEMPERATURE; DELAMINATION; DEFORMATION; TEXTURE;
D O I
10.1016/j.msea.2012.07.051
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
A Fe-14Cr-1W-0.4Ti-0.3Y(2)0(3) ferritic steel bar was characterised by different microstructural techniques in order to evaluate the link between its microstructure and the mechanical properties achieved. This bar was produced by mechanical alloying of a pre-alloyed gas atomised powder with yttria particles, followed by hot extrusion and subsequently annealing. The knowledge of the microstructure of this 14Cr oxide dispersion strengthened (ODS) steel allows for the explanation of the mechanical properties observed, such as the decrease of the ductility found in the transverse orientation of the bar, the existence of zig-zag crack paths in the broken specimens after the impact tests at low temperatures and the appearance of delaminations when the temperature is increased. (c) 2012 Elsevier B.V. All rights reserved.
引用
收藏
页码:696 / 703
页数:8
相关论文
共 50 条
  • [41] Influence of Powder Outgassing Conditions on the Chemical, Microstructural, and Mechanical Properties of a 14 wt% Cr Ferritic ODS Steel
    D. Sornin
    P.-F. Giroux
    E. Rigal
    D. Fabregue
    R. Soulas
    D. Hamon
    Metallurgical and Materials Transactions A, 2017, 48 : 5559 - 5566
  • [42] Tensile anisotropy and creep properties of a Fe-14CrWTi ODS ferritic steel
    Steckmeyer, A.
    Rodrigo, Vargas Hideroa
    Gentzbittel, J. M.
    Rabeau, V.
    Fournier, B.
    JOURNAL OF NUCLEAR MATERIALS, 2012, 426 (1-3) : 182 - 188
  • [43] Influence of Powder Outgassing Conditions on the Chemical, Microstructural, and Mechanical Properties of a 14 wt% Cr Ferritic ODS Steel
    Sornin, D.
    Giroux, P. -F.
    Rigal, E.
    Fabregue, D.
    Soulas, R.
    Hamon, D.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2017, 48A (11): : 5559 - 5566
  • [44] Microstructure of a 14Cr-ODS ferritic steel before and after helium ion implantation
    Lu, Chenyang
    Lu, Zheng
    Xie, Rui
    Liu, Chunming
    Wang, Lumin
    Journal of Nuclear Materials, 2014, 455 (01) : 366 - 370
  • [45] Microstructure of a 14Cr-ODS ferritic steel before and after helium ion implantation
    Lu, Chenyang
    Lu, Zheng
    Xie, Rui
    Liu, Chunming
    Wang, Lumin
    JOURNAL OF NUCLEAR MATERIALS, 2014, 455 (1-3) : 366 - 370
  • [46] INFLUENCE OF MICROSTRUCTURE ON TENSILE PROPERTIES OF DUAL PHASE STEEL
    Salamci, Elmas
    Kabakci, Fikret
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2011, 26 (02): : 263 - 272
  • [47] Influence of Steel Melting Processes on Tensile Properties of 14Cr-15Ni-Ti Stainless Steel
    Nandagopal, M.
    Parameswaran, P.
    Vijayanand, V. D.
    Laha, K.
    Mathew, M. D.
    HIGH TEMPERATURE MATERIALS AND PROCESSES, 2011, 30 (03) : 229 - 232
  • [48] Tensile properties and microstructure of helium implanted EUROFER ODS
    Ryazanov, A. I.
    Chugunov, O. K.
    Ivanov, S. M.
    Latushkin, S. T.
    Lindau, R.
    Moeslang, A.
    Nikitina, A. A.
    Prikhodko, K. E.
    Semenov, E. V.
    Unezhev, V. N.
    Vladimirov, P. V.
    JOURNAL OF NUCLEAR MATERIALS, 2013, 442 (1-3) : S153 - S157
  • [49] High temperature tensile properties and fracture characteristics of bimodal 12Cr-ODS steel
    Chauhan, Ankur
    Litvinov, Dimitri
    Aktaa, Jarir
    JOURNAL OF NUCLEAR MATERIALS, 2016, 468 : 1 - 8
  • [50] Influence Mechanism of Cr Element on Tensile Strength of ODS Alloy
    Ke Y.
    Bai B.
    Liu J.
    Yang W.
    Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 2021, 55 : 122 - 128