Machining Performance for Ultrasonic-Assisted Magnetic Abrasive Finishing of a Titanium Alloy: A Comparison with Magnetic Abrasive Finishing

Titanium alloys are widely used in aerospace, the military industry, electronics, automotive fields, etc., due to their excellent properties such as low density, high strength, high-temperature resistance, and corrosion resistance. Many components need to be finished precisely after being cut in these applications. In order to achieve high-quality and high-efficiency finishing of titanium alloys, ultrasonic-assisted magnetic abrasive finishing (UAMAF) was introduced in this research. The machining performance for UAMAF of a titanium alloy was studied by experimentally comparing UAMAF and magnetic abrasive finishing (MAF). The results show that the cutting force of UAMAF can reach 2 to 4 times that of MAF, and it decreases rapidly with the increase in the machining gap due to the energy loss of ultrasonic impact in the transmission between magnetic abrasives. The surface roughness of UAMAF can reach about Ra 0.075 mu m, which is reduced by about 59% compared with MAF. The main wear type of the magnetic abrasive is that the diamond grits fell off the magnetic abrasive in both UAMAF and MAF. The uniform wear of the magnetic abrasive is realized, and the utilization ratio of the magnetic abrasive is obviously improved in UAMAF.