Parameters prediction of cohesive zone model for simulating composite/adhesive delamination in hygrothermal environments

被引：27

作者：

Cheng, Xiaoquan ^{[1
]}

Zhang, Qian ^{[2
]}

Zhang, Jie ^{[1
]}

Guo, Xin ^{[1
]}

Niu, Zhongrong ^{[2
]}

机构：

[1] Beihang Univ, Sch Aeronaut Sci & Engn, Beijing 100191, Peoples R China

[2] Hefei Univ Technol, Hefei 230009, Anhui, Peoples R China

来源：

COMPOSITES PART B-ENGINEERING | 2019年 / 166卷

基金：

中国国家自然科学基金;

关键词：

Cohesive zone model; Composite/adhesive bonded joint; Fracture energy release rate; Interface strength; Hygrothermal environments; BONDED JOINTS; ADHESIVE;

D O I：

10.1016/j.compositesb.2019.03.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, moisture parameters of adhesive SY-14M-III and composite T800/AC531 were firstly measured, which were used for the following moisture diffusion investigations. Then, double cantilever beam (DCB) tests and end notched flexure (ENF) tests were conducted in four environments, and relevant progressive damage models considering cohesive zone models were established. The results show that the models are efficient by comparison of experimental and numerical results, and eight pairs of cohesive parameters (interface strength and interface stiffness) corresponding to the specified fracture energy release rates were obtained. Finally, a modified Tsai prediction method of cohesive zone model for simulating composite/adhesive delamination in hygrothermal environments was proposed based on an assumption of the composite/adhesive moisture diffusion process, which can be as a reference or basic data for numerical analysis of adhesively bonded composite structures.

引用

页码：710 / 721

页数：12

共 27 条

[11] Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods [J].

Kim, KS ;

Yoo, JS ;

Yi, YM ;

Kim, CG .

COMPOSITE STRUCTURES, 2006, 72 (04) :477-485

[12] An investigation of hygrothermal effects on adhesive materials and double lap shear joints of CFRP composite laminates [J].

Liu, Shufeng ;

Cheng, Xiaoquan ;

Zhang, Qian ;

Zhang, Jie ;

Bao, Jianwen ;

Guo, Xin .

COMPOSITES PART B-ENGINEERING, 2016, 91 :431-440

[13]

Ministry of Aerospace Industry, 1990, COMP MAT DES MAN

[14] Traction-separation laws for progressive failure of bonded scarf repair of composite panel [J].

Ridha, M. ;

Tan, V. B. C. ;

Tay, T. E. .

COMPOSITE STRUCTURES, 2011, 93 (04) :1239-1245

[15] Influence of hygrothermal ageing on the damage mechanisms of flax-fibre reinforced epoxy composite [J].

Scida, Daniel ;

Assarar, Mustapha ;

Poilane, Christophe ;

Ayad, Rezak .

COMPOSITES PART B-ENGINEERING, 2013, 48 :51-58

[16] Double cantilever beam measurement and finite element analysis of cryogenic Mode I interlaminar fracture toughness of glass-cloth/epoxy laminates [J].

Shindo, Y ;

Horiguchi, K ;

Wang, R ;

Kudo, H .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2001, 123 (02) :191-197

[17]

ShuF Liu, 2016, STUDY MECH PROPERTIE

[18]

Tsai S.W., 1988, COMPOSITE DESIGN, V4th

[19] Influence of hygrothermal environment on thermal and mechanical properties of carbon fiber/fiberglass hybrid composites [J].

Tsai, Y. I. ;

Bosze, E. J. ;

Barjasteh, E. ;

Nutt, S. R. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2009, 69 (3-4) :432-437

[20] An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models [J].

Turon, A. ;

Davila, C. G. ;

Camanho, P. P. ;

Costa, J. .

ENGINEERING FRACTURE MECHANICS, 2007, 74 (10) :1665-1682

← 1 2 3 →