Study on heat transfer of porous media for isothermal chamber

被引:7
作者
Yang Lihong [1 ]
Yi, Gan [1 ]
Ping, Liu [1 ]
机构
[1] Univ Shanghai Sci & Technol, Sch Mech Engn, Shanghai 200093, Peoples R China
基金
中国国家自然科学基金;
关键词
Isothermal chamber; Porous media; Temperature characteristics; Numerical simulation; FLOW-RATE CHARACTERISTICS; AUGMENTATION; TUBES;
D O I
10.1016/j.expthermflusci.2012.11.019
中图分类号
O414.1 [热力学];
学科分类号
摘要
Isothermal chamber, which is fabricated by empty chamber stuffed with thin metal wires, could be used for testing the flow rate characteristics of pneumatic component and for forming unsteady flow generator, and its temperature characteristics are critical to its application results. In this paper, based on the stuffers in isothermal chamber were considered as porous media with large porosity and its physical parameters were tested by experiments, temperature characteristics during discharge of three isothermal chambers were studied by experiments and numerical simulations. From the results of experiment and simulation, compared with discharge of empty chamber, it could be seen the discharge processes of chamber A, B and C are nearly isothermal. Though there are differences between simulation and experiment, they share same trends and the simulation result was affected by ETC (effective thermal conductivity) greatly. Consequently, numerical simulation is an efficient, energy-saving and cost-reducing method. (c) 2012 Elsevier Inc. All rights reserved.
引用
收藏
页码:46 / 53
页数:8
相关论文
共 50 条
[31]   Heat transfer and natural convection of nanofluids in porous media [J].
Bourantas, G. C. ;
Skouras, E. D. ;
Loukopoulos, V. C. ;
Burganos, V. N. .
EUROPEAN JOURNAL OF MECHANICS B-FLUIDS, 2014, 43 :45-56
[32]   ADVANCES OF HEAT TRANSFER IN POROUS MEDIA-A REVIEW [J].
Menni, Younes ;
Chamkha, Ali J. ;
Kaid, Noureddine ;
Ameur, Houari ;
Bensafi, Mohammed ;
Sahel, Djamel ;
Lorenzini, Giulio .
SPECIAL TOPICS & REVIEWS IN POROUS MEDIA-AN INTERNATIONAL JOURNAL, 2020, 11 (01) :1-18
[33]   Unsteady heat transfer of porous media solar receiver [J].
Xu C. ;
Liu D.-Y. ;
Zhen Y. ;
Guo S. ;
Yan Y. .
Huanan Ligong Daxue Xuebao/Journal of South China University of Technology (Natural Science), 2011, 39 (03) :42-46+51
[34]   Investigation of transient heat transfer in porous media in HeII [J].
Allain, H. ;
Baudouy, B. .
ADVANCES IN CRYOGENIC ENGINEERING, VOLS 53A AND 53B, 2008, 985 :207-214
[35]   Heat transfer in metal foams and designed porous media [J].
Hutter, C. ;
Buechi, D. ;
Zuber, V. ;
von Rohr, Ph Rudolf .
CHEMICAL ENGINEERING SCIENCE, 2011, 66 (17) :3806-3814
[36]   Simulation on flow behavior of particles and its effect on heat transfer in porous media [J].
Li, Haoting ;
Wang, Shuyan ;
Wang, Ruichen ;
Liu, Yang ;
Shao, Baoli ;
Yuan, Zihan ;
Chen, Yujia ;
Ma, Yimei .
JOURNAL OF PETROLEUM SCIENCE AND ENGINEERING, 2021, 197
[37]   DEVELOPMENT OF DIMENSIONLESS NUMBERS FOR HEAT TRANSFER IN POROUS MEDIA USING A MEMORY CONCEPT [J].
Hossain, M. Enamul ;
Abu-Khamsin, Sidqi A. .
JOURNAL OF POROUS MEDIA, 2012, 15 (10) :957-973
[38]   Heat Transfer Enhancement of Different Channel Geometries Using Nanofluids and Porous Media [J].
Azzawi, Itimad D. J. ;
Yahya, Samir Gh ;
Al-Rubaye, Layth Abed Hasnawi ;
Ali, Senaa Kh .
INTERNATIONAL JOURNAL OF HEAT AND TECHNOLOGY, 2021, 39 (04) :1197-1206
[39]   NUMERICAL SIMULATION OF HEAT, AIR, AND MOISTURE TRANSFER THROUGH A WALL OF POROUS MEDIA [J].
Tesfamariam, Kiflom B. ;
Lin, Cheng-Xian ;
Liu, Fang .
PROCEEDINGS OF THE ASME 2020 HEAT TRANSFER SUMMER CONFERENCE (HT2020), 2020,
[40]   Study on Flow and Heat Transfer Characteristics of Porous Media in Engine Particulate Filters Based on Lattice Boltzmann Method [J].
Fu, Jiale ;
Zhang, Tiechen ;
Li, Menghan ;
Li, Su ;
Zhong, Xianglin ;
Liu, Xiaori .
ENERGIES, 2019, 12 (17)