Influence of mixture proportion and curing condition on contribution of fly ash to strength of concrete

被引:2
作者
Wu, FR
Masuda, Y
Nakamura, S
Sato, S
机构
[1] Utsunomiya Univ, Dept Energy & Environm Sci, Utsunomiya, Tochigi 3218585, Japan
[2] Utsunomiya Univ, Dept Architecture & Civil Engn, Utsunomiya, Tochigi 3218585, Japan
来源
ENVIRONMENTAL ECOLOGY AND TECHNOLOGY OF CONCRETE | 2006年 / 302-303卷
关键词
compressive strength; curing condition; fly ash; mixture proportion; contribution of fly ash to strength;
D O I
10.4028/www.scientific.net/KEM.302-303.235
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
To investigate the strength efficiency of fly ash in concrete, the contribution of fly ash to strength, k value was calculated with the equation: the strength difference between fly ash concrete and control concrete with no fly ash due to the different fly ash content divides by the strength difference between both control concrete with no fly ash due to the different cement content which equals to the former different fly ash content. The k values were organized with fly ash specific surface area, concrete curing condition and age of specimens. Based on a large number of data collected from several proceedings and journals published in Japan during 1981 to 2003, the influences of fly ash property, mixture proportion and curing condition on k value were investigated. Within the range of study the following observations were made: (1) When fly ash concrete kept in moist curing, the k value of fly ash with specific surface area from 250 to 500 m(2) /kg is averagely 0.5 to 0.6 or higher at an age of 91 days and later, whereas that of fly ash with specific surface area from 150 to 250 m(2)/kg is around 0.4 to 0.5, and with some cases contributing little to the strength. (2) In the range of a portland cement content of 250 to 450 kg/m(3), the strength contribution tends to increase as the cement content increases. (3) The contributions of fly ash to strength at 91 and 364 days are 1.44 to 1.97 times as large as those at 28 days, respectively, by standard curing, but conversely decrease to 0.75 to 0.79 times those at 28 days by air curing.
引用
收藏
页码:235 / 241
页数:7
相关论文
共 4 条
[1]  
*GIH SHUPP CO LTD, 1996, CONCR HDB, P212
[2]  
Wu F., 2005, T ARCHITECTURAL I JA, P1
[3]  
WU FR, 2003, P JAPAN CONCRETE I, V25, P569
[4]  
WU FR, 2004, P 8 CANMET ACI INT C, P181