Experimental analysis of reinforced concrete shear deficient beams with circular web openings strengthened by CFRP composite

被引:81
|
作者
Aksoylu, Ceyhun [1 ]
Yazman, Sakir [2 ]
Ozkilic, Yasin Onuralp [3 ]
Gemi, Lokman [4 ]
Arslan, Musa Hakan [1 ]
机构
[1] Konya Tech Univ, Fac Engn & Nat Sci, Dept Civil Engn, TR-42075 Konya, Turkey
[2] Selcuk Univ, Ilgin Vocat Sch, TR-42615 Konya, Turkey
[3] Necmettin Erbakan Univ, Fac Engn & Architecture, Dept Civil Engn, TR-42000 Konya, Turkey
[4] Necmettin Erbakan Univ, Meram Vocat Sch, TR-42000 Konya, Turkey
关键词
Carbon fiber reinforced polymer (CFRP); Circular hole; Damage analysis; Experiment; Reinforced concrete beam; Shear damage; Strengthening; VELOCITY IMPACT RESPONSE; RC BEAMS; R/C BEAMS; STRUCTURAL BEHAVIOR; FLEXURAL BEHAVIOR; DEEP BEAMS; PERFORMANCE; DAMAGE; DESIGN; GFRP;
D O I
10.1016/j.compstruct.2020.112561
中图分类号
O3 [力学];
学科分类号
08 ; 0801 ;
摘要
In this study, two methods of CFRP applications were utilized to strengthen the shear deficient beams with cir-cular holes and a comprehensive experimental program consisting of 11 1/2 scaled specimens was undertaken. The beams with hole diameter (D)/beam height ratio (H) of 0.30, 0.44, 0.64 ratios, symmetrically drilled in shear span were tested under vertical loading. D/H ratio of 0.30 did cause not only a decrease in load carrying capacity but also increased the ductility of the beam. However, significant decreases in load carrying capacities were observed as the hole diameters increase. The load carrying capacity and ductility were significantly improved owing to different CFRP configurations. The fact that the hole diameter and CFRP strengthening method are very important parameters for strengthening is observed. No CFRP strengthening alternative was successful in the beams with a D/H ratio of 0.64. A detailed macro and micro damage analyses are presented.
引用
收藏
页数:19
相关论文
共 50 条
  • [41] Debonding Failure Analysis of Reinforced Concrete Beams Strengthened with CFRP Plates
    Thamrin, Rendy
    Zaidir, Zaidir
    Desharma, Silvy
    POLYMERS, 2021, 13 (16)
  • [42] EXPERIMENTAL STUDY OF REINFORCED CONCRETE BEAMS STRENGTHENED WITH A GFRP CHANNEL AND CFRP SHEETS
    Hong, Won-Kee
    Park, Seon-Chee
    Kim, Hee-Cheul
    Kim, Jin-Min
    Kim, Seung-Il
    Lee, Seung-Geun
    STRUCTURAL DESIGN OF TALL AND SPECIAL BUILDINGS, 2010, 19 (05) : 497 - 517
  • [43] Shear strengthening of reinforced concrete T-beams with anchored and non-anchored CFRP fabrics
    Yazman, Sakir
    Aksoylu, Ceyhun
    Gemi, Lokman
    Arslan, Musa Hakan
    Hamad, Ahmed Abed
    Ozkilic, Yasin Onuralp
    STRUCTURES, 2022, 39 : 527 - 542
  • [44] Behaviour of reinforced concrete beams shear strengthened with hybrid combination of UHPC and CFRP composites
    Morthala, Rahul Reddy
    Balla, Taraka M. R.
    Prakash, S. Suriya
    STRUCTURES, 2025, 74
  • [45] Impact of elevated temperature and anchored grooves on the shear behavior of reinforced concrete beams strengthened with CFRP composites
    Al-Rousan, Rajai Z.
    CASE STUDIES IN CONSTRUCTION MATERIALS, 2021, 14
  • [46] Method of analysis to evaluate the CFRP Shear-Strengthened in Reinforced Concrete
    Parra, C.
    Martinez-Conesa, E.
    Valcuende, M.
    Garrido, A.
    INFORMES DE LA CONSTRUCCION, 2012, 64 (526) : 197 - 206
  • [47] Experimental Study on Flexural Behaviour of Pre-damaged Reinforced Concrete Beams Strengthened with CFRP
    Xie Jian-He
    Guo Yong-Chang
    Liu Yi-Feng
    Chen Gong-Fa
    MATERIALE PLASTICE, 2014, 51 (04) : 370 - 375
  • [48] Shear performance of short-span FRP-reinforced concrete beams strengthened with CFRP and TRC
    Cao Thanh Ngoc Tran
    Xuan Huy Nguyen
    Huy Cuong Nguyen
    Dang Dung Le
    ENGINEERING STRUCTURES, 2021, 242
  • [49] Performance of Reinforced Concrete Beams Strengthened with CFRP Composite in Corrosive Environment
    Chotickai, Piya
    Chimmanee, Wasin
    ADVANCED BUILDING MATERIALS, PTS 1-4, 2011, 250-253 (1-4): : 3706 - 3714
  • [50] Reinforced concrete beams with web openings: A state of the art review
    Ahmed, A.
    Fayyadh, M. M.
    Naganathan, S.
    Nasharuddin, K.
    MATERIALS & DESIGN, 2012, 40 : 90 - 102