Phase equilibria study in binary systems (tetra-n-butylphosphonium tosylate ionic liquid+1-alcohol, or benzene, or n-alkylbenzene)

Ambient pressure (solid + liquid) equilibria (SLE) and (liquid + liquid) equilibria (LLE) of binary systems-ionic liquid (IL) tetra-n-butylphosphonium p-toluenesulfonate + I -alcohol (1-butanol, I-hexanol, 1-octanol, 1-decanol, or 1-dodecanol), benzene, or n-alkylbenzene (toluene, ethylbenzene, n-propylbenzene)- have been determined by using dynamic method in a broad range of mole fractions and temperatures from 250 to 335 K. For binaries containing alcohol, simple eutectic diagrams were observed with complete miscibility in the liquid phase. Only in the case of system { IL + n-propylbenzene} was mutual immiscibility with an upper critical solution temperature (UCST) with low solubility of the IL in the alcohol and high solubility of the alcohol in the IL detected. The basic thermal properties of pure IL, i.e., melting and glass-transition temperatures as well as enthalpy of melting, have been measured with differential scanning microcalorimetry technique (DSC). Well-known UNIQUAC, Wilson, NRTL, NRTL1, and NRTL2 equations have been fitted to obtain experimental data sets. For the system containing immiscibility gap (IL + n-propylbenzene}, parameters of the equations have been derived only from SLE data. As a measure of goodness of correlations, root-mean square deviations of temperature have been used. These experimental results were compared to the previously measured binary systems with tetra-n-butylphosphonium methanesulfonate. Changing anion from methanesulfonate to p-toluenesulfonate decreases solubilities in systems with alcohols and increases the solubilities in binary systems with benzene and alkylbenzenes.