The adsorption of zinc dialkyldithiophosphates on partially stabilized zirconia from hydrocarbon solution

被引:5
|
作者
Margielewski, L
Stanecka, R
Partyka, S
Plaza, S
机构
[1] Univ Lodz, Dept Chem Technol & Environm Protect, PL-90236 Lodz, Poland
[2] Univ Montpellier, LAMMI, UMR 5072, F-34095 Montpellier, France
关键词
ZDTP adsorption; differential molar enthalpies of adsorption; adsorption isotherms; partially stabilized zirconia;
D O I
10.1007/s11249-005-9003-6
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Kinetics, isotherms and enthalpy of adsorption of zinc di-n-alkyl(di-n-alkylphenyl, di-n-dialkylphenyl) dithiophosphates (ZDTPs) lubricating oil additives on zirconia partially stabilized by yttria (PSZ) powder from hydrocarbon solution at temperatures 25 degrees C and 35 degrees C were done. The adsorption enthalpy has been determined using a Montcal calorimeter. ZDTP adsorption isotherms are Langmuir-like. The adsorption quantities and differential molar enthalpies (Delta H-d(a)) of ZDTPs adsorption on PSZ are low for n-alkyl derivatives, the adsorption decreases with the increasing length of the hydrocarbon chain of the additive ZDTP, the unexpectedly for di-n-propyl ZDTP the differential molar enthalpies of adsorption at 25 degrees C are very low, near zero and for di-n-dialkylphenyl ZDTP only at lower coverage ratios are endothermic, at higher surface coverage for this and remaining additives are exothermic. At 35 degrees C all n-alkyl ZDTPs adsorb on PSZ endothermically endothermic, while both aryl ZDTPs exhibit exothermic effects. All ZDTPs are reversibly physisorbed at 25 degrees C and at 35 degrees C except for both mono- and dialkylphenyl ZDTPs, which are weakly chemisorbed.
引用
收藏
页码:17 / 24
页数:8
相关论文
共 50 条
  • [31] The Effect of a Carbon Additive on Compaction of Partially Stabilized Zirconia Powders upon Pressing and Sintering
    S. A. Ghyngazov
    I. P. Vasil’ev
    V. A. Boltueva
    Technical Physics Letters, 2022, 48 : 311 - 315
  • [32] The Effect of a Carbon Additive on Compaction of Partially Stabilized Zirconia Powders upon Pressing and Sintering
    Ghyngazov, S. A.
    Vasil'ev, I. P.
    Boltueva, V. A.
    TECHNICAL PHYSICS LETTERS, 2022, 48 (12) : 311 - 315
  • [33] NEUTRON-DIFFRACTION STUDIES OF PHASE-TRANSFORMATIONS BETWEEN TETRAGONAL AND ORTHORHOMBIC ZIRCONIA IN MAGNESIA-PARTIALLY-STABILIZED ZIRCONIA
    HOWARD, CJ
    KISI, EH
    ROBERTS, RB
    HILL, RJ
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (10) : 2828 - 2833
  • [34] Effects of material reactivity on the sintering properties of magnesium oxide partially stabilized zirconia metering nozzle
    Zhao L.
    Huang Q.
    Yao S.
    Wang H.
    Xue Q.
    Materials Science Forum, 2020, 980 : 25 - 33
  • [35] Support vector machine and its predicting stability of partially stabilized zirconia by microwave heating preparation
    Yang, Biao
    Li, Wei
    Liu, Li-jun
    Peng, Jin-hui
    Zhang, Li-bo
    Zhang, Shi-min
    Guo, Sheng-hui
    ADVANCED RESEARCH ON ADVANCED STRUCTURE, MATERIALS AND ENGINEERING, 2012, 382 : 281 - +
  • [36] Effect of heat treatment on the structure and mechanical properties of partially gadolinia-stabilized zirconia crystals
    Borik, M. A.
    Chislov, A. S.
    Kulebyakin, A. V.
    Lomonova, E. E.
    Milovich, F. O.
    Myzina, V. A.
    Ryabochkina, P. A.
    Sidorova, N. V.
    Tabachkova, N. Yu.
    JOURNAL OF ASIAN CERAMIC SOCIETIES, 2021, 9 (02) : 559 - 569
  • [37] The effect of staining and vacuum sintering on optical and mechanical properties of partially and fully stabilized monolithic zirconia
    Sulaiman, Taiseer A.
    Abdulmajeed, Aous A.
    Donovan, Terrence E.
    Vallittu, Pekka K.
    Narhi, Tim O.
    Lassila, Lippo V.
    DENTAL MATERIALS JOURNAL, 2015, 34 (05) : 605 - 610
  • [38] Ultra precise thermal expansion measurements of partially stabilized zirconia gauge blocks with an interferometric dilatometer
    Okaji, M
    Yamada, N
    Moriyama, H
    RECENT DEVELOPMENTS IN OPTICAL GAUGE BLOCK METROLOGY, 1998, 3477 : 279 - 287
  • [39] Micromechanical properties and microstructure evolution of magnesia partially stabilized zirconia prepared by spark plasma sintering
    Cho, Jaehun
    Yang, Bo
    Shen, Chao
    Wang, Haiyan
    Zhang, Xinghang
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (03) : 1098 - 1107
  • [40] Partially stabilized zirconia moulds fabricated by stereolithographic additive manufacturing via digital light processing
    Wang, Li
    Liu, Xiaodong
    Wang, Gong
    Tang, Weizhe
    Li, Shan
    Duan, Wenyan
    Dou, Rui
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2020, 770