The adsorption of zinc dialkyldithiophosphates on partially stabilized zirconia from hydrocarbon solution

被引:5
|
作者
Margielewski, L
Stanecka, R
Partyka, S
Plaza, S
机构
[1] Univ Lodz, Dept Chem Technol & Environm Protect, PL-90236 Lodz, Poland
[2] Univ Montpellier, LAMMI, UMR 5072, F-34095 Montpellier, France
关键词
ZDTP adsorption; differential molar enthalpies of adsorption; adsorption isotherms; partially stabilized zirconia;
D O I
10.1007/s11249-005-9003-6
中图分类号
TQ [化学工业];
学科分类号
0817 ;
摘要
Kinetics, isotherms and enthalpy of adsorption of zinc di-n-alkyl(di-n-alkylphenyl, di-n-dialkylphenyl) dithiophosphates (ZDTPs) lubricating oil additives on zirconia partially stabilized by yttria (PSZ) powder from hydrocarbon solution at temperatures 25 degrees C and 35 degrees C were done. The adsorption enthalpy has been determined using a Montcal calorimeter. ZDTP adsorption isotherms are Langmuir-like. The adsorption quantities and differential molar enthalpies (Delta H-d(a)) of ZDTPs adsorption on PSZ are low for n-alkyl derivatives, the adsorption decreases with the increasing length of the hydrocarbon chain of the additive ZDTP, the unexpectedly for di-n-propyl ZDTP the differential molar enthalpies of adsorption at 25 degrees C are very low, near zero and for di-n-dialkylphenyl ZDTP only at lower coverage ratios are endothermic, at higher surface coverage for this and remaining additives are exothermic. At 35 degrees C all n-alkyl ZDTPs adsorb on PSZ endothermically endothermic, while both aryl ZDTPs exhibit exothermic effects. All ZDTPs are reversibly physisorbed at 25 degrees C and at 35 degrees C except for both mono- and dialkylphenyl ZDTPs, which are weakly chemisorbed.
引用
收藏
页码:17 / 24
页数:8
相关论文
共 50 条
  • [21] Phase Transformation by 100 keV Electron Irradiation in Partially Stabilized Zirconia
    Okuno, Yasuki
    Okubo, Nariaki
    QUANTUM BEAM SCIENCE, 2021, 5 (03)
  • [22] PILOT-SCALE PREPARATION OF PARTIALLY STABILIZED ZIRCONIA BY MICROWAVE IRRADIATION
    Chen, Guo
    Chen, Jin
    Peng, Jinhui
    Guo, Shenghui
    METALURGIA INTERNATIONAL, 2011, 16 (07): : 89 - 93
  • [23] Surface integrity and flexural strength improvement in grinding partially stabilized zirconia
    Khodaii, Javad
    Barazandeh, Farshad
    Rezaei, Seyed Mehdi
    Adibi, Hamed
    Sarhan, Ahmed A. D.
    JOURNAL OF CENTRAL SOUTH UNIVERSITY, 2019, 26 (12) : 3261 - 3278
  • [24] MIXED-MODE FRACTURE-BEHAVIOR OF PARTIALLY-STABILIZED ZIRCONIA
    KOGO, Y
    KAGAWA, Y
    HATTA, H
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1992, 56 (11) : 1272 - 1279
  • [25] Corrosion Mechanism of Calcium Oxide Partially Stabilized Zirconia by an Alkaline Metallurgical Slag
    Zhao, Liang
    Yao, Shuang
    Kang, Le
    Sun, Hua-Yin
    Huang, Qian
    SCIENCE OF ADVANCED MATERIALS, 2019, 11 (04) : 483 - 488
  • [26] COMPARATIVE PHASE EVOLUTION, MORPHOLOGICAL AND OPTICAL ANALYSIS OF PARTIALLY STABILIZED ZIRCONIA CERAMICS
    Cojan, Claudia Andreea
    Barabas, Reka
    Muresan-Pop, Marieta
    Bizo, Liliana
    STUDIA UNIVERSITATIS BABES-BOLYAI CHEMIA, 2024, 69 (02): : 7 - 17
  • [27] TRANSFORMATION PLASTICITY AT HIGH-STRAIN RATE IN MAGNESIA-PARTIALLY-STABILIZED ZIRCONIA
    ROGERS, WP
    NEMATNASSER, S
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1990, 73 (01) : 136 - 139
  • [28] Importance of tetragonal phase in high-translucent partially stabilized zirconia for dental restorations
    Zhang, Fei
    Van Meerbeek, Bart
    Vleugels, Jozef
    DENTAL MATERIALS, 2020, 36 (04) : 491 - 500
  • [29] Research on Predicting the Stability of Partially Stabilized Zirconia Prepared by Microwave Heating using SVM
    Guo, Shenghui
    Liu, Lijun
    Li, Dongbo
    Peng, Jinhui
    Zhang, Libo
    Chen, Guo
    ADVANCES IN SUPERALLOYS, PTS 1 AND 2, 2011, 146-147 : 510 - 516
  • [30] Evaluation of CaO-CeO2-partially stabilized zirconia thermal barrier coatings
    Ramaswamy, P
    Seetharamu, S
    Varma, KBR
    Rao, KJ
    CERAMICS INTERNATIONAL, 1999, 25 (04) : 317 - 324