Strength response of 1200 MPa grade martensite-ferrite dual-phase steel under high strain rates

被引：23
|
作者：
Li, Yi [1 ]
Song, Renbo [1 ]
Jiang, Long [1 ]
Zhao, Zhiyang [1 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
来源：
SCRIPTA MATERIALIA | 2019年 / 164卷
关键词：
Strain rate sensitivity; Martensitic strength; Work hardening; Softening effect; BEHAVIOR; DEFORMATION; MECHANISMS;
D O I：
10.1016/j.scriptamat.2019.01.031
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A commercial 1200 MPa grade martensite-ferrite dual-phase steel (martensite volume fraction is 61.3%) was studied by dynamic tensile tests and Nano-indentation tests. Results indicate that the strain rate sensitivity of this DP1200 steel is mainly owing to the increase of martensitic strength. Both (yield strength) R-p0.2 and (ultimate tensile strength) R-m increase with the increase of strain rate. But the degree of work hardening is decreased when strain rate exceeds the critical value (about 600 s(-1)). The above result is mainly caused by the two facts: i) ferrite loses strain rate sensitivity; ii) softening effect of adiabatic heating on martensite. (C) 2019 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：21 / 24
页数：4
相关论文
共 50 条
  • [1] Deformation response of ferrite and martensite in a dual-phase steel
    Ghassemi-Armaki, H.
    Maass, R.
    Bhat, S. P.
    Sriram, S.
    Greer, J. R.
    Kumar, K. S.
    ACTA MATERIALIA, 2014, 62 : 197 - 211
  • [2] Effect of martensite morphology and volume fraction on strain hardening and fracture behavior of martensite-ferrite dual phase steel
    Zhang, Jiecen
    Di, Hongshuang
    Deng, Yonggang
    Misra, R. D. K.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 627 : 230 - 240
  • [3] EBSD Study of Damage Mechanisms in a High-Strength Ferrite-Martensite Dual-Phase Steel
    Saeidi, N.
    Ashrafizadeh, F.
    Niroumand, B.
    Barlat, F.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (01) : 53 - 58
  • [4] DYNAMIC STRENGTH AND FRACTURE BEHAVIOUR OF DUAL-PHASE HIGH STRENGTH STEEL UNDER HIGH STRAIN RATE
    Kumar, Sunil M. R.
    Schmidova, Eva
    Culek, Bohumil
    Hojka, Premysl
    28TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS (METAL 2019), 2019, : 538 - 543
  • [5] Embrittlement mechanism of ferrite-martensite dual-phase steel during strain-baking
    Yu, Hang
    Zhang, Cheng
    Qiao, Lijie
    Yan, Yu
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 884
  • [6] Achieving High Strength and Plasticity by Controlling the Volume Fractions of Martensite and Ferrite in Rare Earth, Micro-Alloyed Dual-Phase Steel
    Li, Zhishen
    Song, Xinli
    Yu, Jin
    Geng, Wei
    You, Xuewen
    Jia, Juan
    METALS, 2025, 15 (03)
  • [7] Stretching the mechanical properties in a 590MPa ferrite-martensite dual-phase steel through rapid heating
    Deng, Yonggang
    Di, Hongshuang
    Zhang, Jiecen
    Misra, R. D. K.
    METALLURGICAL RESEARCH & TECHNOLOGY, 2017, 114 (05)
  • [8] A micro-level strain analysis of a high-strength dual-phase steel
    Kapp, Marianne
    Hebesberger, Thomas
    Kolednik, Otmar
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2011, 102 (06) : 687 - 691
  • [9] Role of Interface between Ferrite and Martensite in Hydrogen Embrittlement Behavior of Ultra-high Strength Dual-phase Steel Sheets
    Takashima, Katsutoshi
    Nishimura, Takamasa
    Yokoyama, Ken'ichi
    Funakawa, Yoshimasa
    ISIJ INTERNATIONAL, 2019, 59 (09) : 1676 - 1682
  • [10] Quantification of the carbon content of single grains in martensite-ferrite dual phase steel by UHV-EDXS
    Saeckl, Gary
    Arndt, Martin
    Duchoslav, Jiri
    Groiss, Heiko
    Steineder, Katharina
    Stifter, David
    MATERIALS CHARACTERIZATION, 2022, 189
12345