Process optimization and extraction of nickel by hollow fiber membrane using response surface methodology

The extraction of nickel has been carried out by the hollow fiber membrane technique using D2EHPA as the mobile carrier from the manganese nodule leach liquor after separation of Cu(II), Zn(II) and Co(II). The experiments were designed according to central composite design (CCD), which is a response surface methodology. The process parameters used for the experimental design were: pH, concentration. of D2EHPA in the membrane phase, flow rate and H2SO4 concentration in the strip solution. Based on the analysis of variance, a reduced quadratic model was found to best fit the experimental data. The process parameters were optimized to maximize the nickel flux and the optimized conditions were flow rate: 630 mL/min; pH: 6.37; D2EHPA: 1.15 mol/L (1,150 mol/m(3)) and H2SO4: 2.39% (430.2 mol/m(3)), for a maximum nickel flux of 7.08 x 10(-5) mol/m(2.)s, which was in good agreement with the actual Ni flux of 6.99 x10(-5) mol/m(2.)s.