High-Temperature Synthesis of Cast Cr2AlC at an Inert Gas Overpressure

被引：7

作者：

Miloserdov, P. A. ^{[1
]}

Gorshkov, V. A. ^{[1
]}

Yukhvid, V. I. ^{[1
]}

机构：

[1] Russian Acad Sci, Inst Struct Macrokinet & Mat Sci, Chernogolovka 142432, Moscow Oblast, Russia

来源：

INORGANIC MATERIALS | 2013年 / 49卷 / 08期

关键词：

Spark Plasma Sinter; Self Propagate High Temperature Synthesis; Combustion Velocity; Chromium Carbide; Self Propagate High Temperature Synthesis Process;

D O I：

10.1134/S002016851307011X

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper reports the high-temperature synthesis of cast Cr2AlC from mixtures of chromium(III) oxide, chromium(VI) oxide, aluminum, and carbon at an increased inert gas (Ar or N) pressure in a 3-L self-propagating high-temperature synthesis reactor at an initial argon pressure p(i) = 5 MPa. The reaction products were characterized by X-ray diffraction and X-ray microanalysis. The results indicate that the ingots obtained under optimized conditions consisted of Cr2AlC and Cr3C2 with a ratio of about 85 : 15.

引用

页码：781 / 785

页数：5

共 45 条

[21] Production of low-porosity products by forced self-propagating high-temperature synthesis-compaction
V. K. Smolyakov
Combustion, Explosion and Shock Waves, 1998, 34 : 405 - 410
[22] Participation of gases in the surface formation during self-propagating high-temperature synthesis of porous nickel titanium
Yu. F. Yasenchuk
N. V. Artyukhova
V. A. Novikov
V. E. Gyunter
Technical Physics Letters, 2014, 40 : 697 - 700
[23] Preparation of WC and W2C by self-propagating high-temperature synthesis using a mixture of tungsten, titanium, and carbon black powders
Poluboyarov, V. A.
Zhdanok, A. A.
Korotaeva, Z. A.
Kuznetsov, V. A.
INORGANIC MATERIALS, 2014, 50 (05) : 469 - 472
[24] Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique
Weibing Zhou
Bingchu Mei
Jiaoqun Zhu
Xiaolin Hong
Journal of Materials Science, 2005, 40 : 2099 - 2100
[25] Synthesis of high-purity Ti3SiC2 and Ti3AlC2 by spark plasma sintering (SPS) technique
Zhou, WB
Me, BC
Zhu, JQ
Hong, XL
JOURNAL OF MATERIALS SCIENCE, 2005, 40 (08) : 2099 - 2100
[26] Preparation of WC and W2C by self-propagating high-temperature synthesis using a mixture of tungsten, titanium, and carbon black powders
V. A. Poluboyarov
A. A. Zhdanok
Z. A. Korotaeva
V. A. Kuznetsov
Inorganic Materials, 2014, 50 : 469 - 472
[27] Self-propagating high-temperature synthesis of Y2O3 powders from Y(NO3)3x(CH3COO)3(1 − x) · nH2O
S. S. Balabanov
E. M. Gavrishchuk
A. M. Kut’in
D. A. Permin
Inorganic Materials, 2011, 47 : 484 - 488
[28] Nonisothermal method for calculating the mold equipment of an apparatus for compacting the hot products of self-propagating high-temperature synthesis
L. S. Stelmakh
A. M. Stolin
D. S. Dvoretskii
Theoretical Foundations of Chemical Engineering, 2010, 44 : 192 - 200
[29] Electrical and thermomechanical properties of materials based on nonstoichiometric titanium carbide prepared by self-propagating high-temperature synthesis
A. M. Shul’pekov
G. V. Lyamina
Inorganic Materials, 2011, 47 : 722 - 727
[30] Fabrication of Ni-Ti Alloy by Self-Propagating High-Temperature Synthesis and Spark Plasma Sintering Technique
Pavel Salvetr
Tomáš František Kubatík
Damien Pignol
Pavel Novák
Metallurgical and Materials Transactions B, 2017, 48 : 772 - 778

← 1 2 3 4 5 →