Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis

被引：224

作者：

Liu, Shiwen ^{[1
]}

Zhu, Haihong ^{[1
]}

Peng, Gangyong ^{[1
]}

Yin, Jie ^{[1
]}

Zeng, Xiaoyan ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, Wuhan Natl Lab Optoelect, Wuhan 430074, Hubei, Peoples R China

来源：

MATERIALS & DESIGN | 2018年 / 142卷

基金：

中国国家自然科学基金;

关键词：

Grain structure; Finite element; Selective laser melting; Additive manufacturing; THERMAL-BEHAVIOR; ALLOY; SIMULATION; POWDER; THERMODYNAMICS; TEMPERATURE; TRANSITION; MECHANISM; STRENGTH; COLUMNAR;

D O I：

10.1016/j.matdes.2018.01.022

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Selective Laser Melting (SLM) technology is a complex process controlled by mass and heat transfer. It is very important to understand the microstructure of single track. This work predicted the single track's microstructure of SLMed AlSi10Mg by calculating the thermal variables and using columnar to equiaxed transition (CET) criterion. Firstly, a high accurate transient three-dimensional finite element model was established with anisotropic thermal conductivities verified by both molten pool dimensions and track surface feature. Secondly, the finite element model was used to accurately predict the thermal variables, such as temperature gradient, cooling rate and solidification rate of the molten pool. Thirdly, a columnar to equiaxed transition criterion was established by connecting the predicted thermal variables and experimental microstructure, the experimental results verified that it can predict the microstructure of SLMed AlSi10Mg very well. (c) 2018 Elsevier Ltd. All rights reserved.

引用

页码：319 / 328

页数：10

共 30 条

[1] On the formation of A1Si10Mg single tracks and layers in selective laser melting: Microstructure and nano-mechanical properties [J].

Aboulkhair, Nesma T. ;

Maskery, Ian ;

Tuck, Chris ;

Ashcroft, Ian ;

Everitt, Nicola M. .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 230 :88-98

[2]

[Anonymous], 2002, FOREWORD RECOMMENDED, pvii

[3]

Cheng B., 2015, P ASME 2015 INT MECH, P1

[4] Influence of thermodynamics within molten pool on migration and distribution state of reinforcement during selective laser melting of AlN/AlSi 10Mg composites [J].

Dai, Donghua ;

Gu, Dongdong .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2016, 100 :14-24

[5] Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres [J].

Dai, Donghua ;

Gu, Dongdong .

APPLIED SURFACE SCIENCE, 2015, 355 :310-319

[6] Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments [J].

Dai, Donghua ;

Gu, Dongdong .

MATERIALS & DESIGN, 2014, 55 :482-491

[7] Finite element analysis of the effect of volume shrinkage during laser densification [J].

Dal, K ;

Shaw, L .

ACTA MATERIALIA, 2005, 53 (18) :4743-4754

[8] Finite Element Simulation of Selective Laser Melting process considering Optical Penetration Depth of laser in powder bed [J].

Foroozmehr, Ali ;

Badrossamay, Mohsen ;

Foroozmehr, Ehsan ;

Golabi, Sa'id .

MATERIALS & DESIGN, 2016, 89 :255-263

[9] Modeling of thermal behavior and mass transport in multi-layer laser additive manufacturing of Ni-based alloy on cast iron [J].

Gan, Zhengtao ;

Liu, Hao ;

Li, Shaoxia ;

He, Xiuli ;

Yu, Gang .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 111 :709-722

[10] Finite element analysis of thermal behavior of metal powder during selective laser melting [J].

Huang, Y. ;

Yang, L. J. ;

Du, X. Z. ;

Yang, Y. P. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2016, 104 :146-157

← 1 2 3 →