Effect of the Manganese Phosphate Solution with Additive Agent of Tartaric Acid

被引：4

作者：

Noh, Young-Tai ^{[1
]}

Byoun, Young-Min ^{[1
]}

Park, Jong-Kyu ^{[2
]}

Seo, Sun-Kyo ^{[2
]}

Hyun, Soong-Keun ^{[2
]}

Lee, Chi-Hwan ^{[2
]}

机构：

[1] KCL, Met & Machinery Team, 199 Gasan Digital 1 Ro, Seoul 08503, South Korea

[2] Inha Univ, Dept Met Engn, Coll Engn, Incheon 22212, South Korea

来源：

JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY | 2018年 / 18卷 / 02期

关键词：

Manganese Phosphate; Tribology; Corrosion Resistance; Additive Agent; Friction; WEAR BEHAVIOR; COATINGS; STEEL;

D O I：

10.1166/jnn.2018.14931

中图分类号：

O6 [化学];

学科分类号：

0703 ;

摘要：

In this study, the correlation between morphology and friction of manganese phosphate coating layer with additive agent of tartaric acid by 2, 4, 6 g were investigated. The microstructure and morphology of the coatings were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS) and atomic force microscopic (AFM). Potentio-dynamic polarization test was carried out in order to evaluate the corrosion protection properties of manganese phosphate coating in 3.5 wt.% NaCl solution. Also, the tribology property of manganese phophate coating was tested by ball-on disk. In the results of EDS analysis, coating layer consists of elements such as Mn, P, Fe, O, and C. XRD showed that (Mn, Fe)(5)H-2(PO4)(4) center dot 4H(2)O in manganese phosphate coating layer was formed by the chemical reaction between manganese phosphate and elements in SM45C alloy. The corrosion resistance of manganese phosphate coating with additive agent was superior than the one without additive agent. Also, in the Fe amount in sludge, manganese phosphate coating layer with additive agent was observed to be considerably decreased.

引用

页码：1152 / 1157

页数：6

共 11 条

[1]

Alvarado-Macías G, 2013, J MEX CHEM SOC, V57, P328

[2]

CAPE TW, 1987, METALS HDB, V13, P383

[3] Friction and wear behaviour of steam-oxidized sintered iron components coated with manganese phosphate [J].

De Mello, Jose Daniel B. ;

Costa, Henara L. ;

Binder, Roberto .

WEAR, 2007, 263 :842-848

[4] Degradation and crystalline reorganization of hureaulite crystals during the manganese phosphating of a high strength steel [J].

Galvan-Reyes, C. ;

Salinas-Rodriguez, A. ;

Fuentes-Aceituno, J. C. .

SURFACE & COATINGS TECHNOLOGY, 2015, 275 :E10-E20

[5] Annealing improvement of tribological properties of manganese phosphate coatings [J].

Hivart, P ;

Hauw, B ;

Crampon, J ;

Bricout, JP .

WEAR, 1998, 219 (02) :195-204

[6] SOME ASPECTS OF METALLURGY AND WEAR RESISTANCE OF SURFACE COATINGS [J].

HURRICKS, PL .

WEAR, 1972, 22 (03) :291-&

[7] The Wear behaviour of Manganese Phosphate Coatings applied to AISI D2Steel subject to different Heat treatment Processes [J].

Ilaiyavel, S. ;

Venkatesan, A. .

INTERNATIONAL CONFERENCE ON MODELLING OPTIMIZATION AND COMPUTING, 2012, 38 :1916-1924

[8]

Narayanan TSNS, 2005, REV ADV MATER SCI, V9, P130

[9] The corrosion behaviour of manganese phosphate coatings applied to AISI 4140 steel subjected to different heat treatments [J].

Totik, Y .

SURFACE & COATINGS TECHNOLOGY, 2006, 200 (08) :2711-2717

[10] Effects of temperature and applied potential on the microstructure and electrochemical behavior of manganese phosphate coating [J].

Wang, Chao-Min ;

Liau, Han-Chih ;

Tsai, Wen-Ta .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (06) :2994-3001

← 1 2 →