Fatigue and Damage in Structural Materials Studied by X-Ray Tomography

被引：128

作者：

Withers, Philip J. ^{[1
]}

Preuss, Michael ^{[1
]}

机构：

[1] Univ Manchester, Sch Mat, Manchester M13 9PL, Lancs, England

来源：

ANNUAL REVIEW OF MATERIALS RESEARCH, VOL 42 | 2012年 / 42卷

基金：

英国工程与自然科学研究理事会;

关键词：

X-ray computed tomography (CT); fatigue crack; damage accumulation; stress corrosion cracking (SCC); RESOLUTION COMPUTED-TOMOGRAPHY; STRESS-CORROSION CRACKS; IN-SITU; SYNCHROTRON-RADIATION; CREEP CAVITATION; GRAIN-BOUNDARIES; INTERNAL DAMAGE; MICROTOMOGRAPHY; FRACTURE; CLOSURE;

D O I：

10.1146/annurev-matsci-070511-155111

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper reviews progress using X-ray computed tomography to study damage accumulation. Since its introduction, X-ray microtomography has been used to diagnose the presence of damage. In this review, a wide range of damage-accumulation mechanisms are covered including cavitation, fracture, microcracking, fatigue cracking, and stress corrosion cracking. In this regard, the advantages of attenuation and phase contrast imaging are discussed. This review includes both measurements of damage accumulation, taken postmortem, and the incremental monitoring of damage-accumulation processes during life (sometimes termed four-dimensional tomography). In addition to the qualitative diagnostic studies, the quantitative analysis of tomography images to extract key failure parameters is examined.

引用

页码：81 / 103

页数：23

共 50 条

[21] Damage of Composite Materials Subjected to Projectile Penetration Using High Resolution X-Ray Micro Computed Tomography
Penumadu, D.
Kim, F.
Bunn, J.
EXPERIMENTAL MECHANICS, 2016, 56 (04) : 607 - 616
[22] Multiscale observation of polymer materials in order to explain mechanical behaviour and damage mechanism by X-ray computed tomography
Bayraktar, E
Montembault, F
Bathias, C
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2004, 20 : 27 - 31
[23] Damage fluctuations in creep deformed copper studied with synchrotron X-ray microtomography
Abbasi, Ramin
Renversade, Loic
Dzieciol, Krzysztof
Borbely, Andras
Kaysser-Pyzalla, Anke R.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (02) : 228 - 233
[24] Volumetric assessment of fatigue damage in a SiCf/SiC ceramic matrix composite via in situ X-ray computed tomography
Quiney, Zak
Weston, Eleri
Nicholson, P. Ian
Pattison, Stephen
Bache, Martin R.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2020, 40 (11) : 3788 - 3794
[25] X-ray computed tomography of polymer composites
Garcea, S. C.
Wang, Y.
Withers, P. J.
COMPOSITES SCIENCE AND TECHNOLOGY, 2018, 156 : 305 - 319
[26] In situ compressive damage of cement paste characterized by lab source X-ray computer tomography
Wan, Keshu
Xue, Xiaobo
MATERIALS CHARACTERIZATION, 2013, 82 : 32 - 40
[27] Capturing structural dynamics of materials by picosecond X-ray pulses
Adachi, S.
Sato, T.
Nozawa, S.
ACTA CRYSTALLOGRAPHICA A-FOUNDATION AND ADVANCES, 2014, 70 : C764 - C764
[28] Quantitative X-ray tomography
Maire, E.
Withers, P. J.
INTERNATIONAL MATERIALS REVIEWS, 2014, 59 (01) : 1 - 43
[29] Fast X-ray diffraction (XRD) tomography for enhanced identification of materials
Korolkovas, Airidas
SCIENTIFIC REPORTS, 2022, 12 (01)
[30] 3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography
Herbig, Michael
King, Andrew
Reischig, Peter
Proudhon, Henry
Lauridsen, Erik M.
Marrow, James
Buffiere, Jean-Yves
Ludwig, Wolfgang
ACTA MATERIALIA, 2011, 59 (02) : 590 - 601

← 1 2 3 4 5 →