A Review on Solid-State-Based Additive Friction Stir Deposition

被引：27

作者：

Dong, Hongrui ^{[1
]}

Li, Xiaoqiang ^{[2
]}

Xu, Ke ^{[2
]}

Zang, Zhenyu ^{[2
]}

Liu, Xin ^{[2
]}

Zhang, Zongjiang ^{[2
]}

Xiao, Wenlong ^{[1
]}

Li, Yong ^{[2
]}

机构：

[1] Beihang Univ, Sch Mat Sci & Engn, Beijing 100191, Peoples R China

[2] Beihang Univ, Sch Mech Engn & Automat, Beijing 100191, Peoples R China

来源：

AEROSPACE | 2022年 / 9卷 / 10期

关键词：

AFSD; dynamic recrystallization; mechanical property; ALUMINUM-MATRIX COMPOSITES; RECRYSTALLIZATION; MICROSTRUCTURE; TEMPERATURE; FABRICATION; BEHAVIOR;

D O I：

10.3390/aerospace9100565

中图分类号：

V [航空、航天];

学科分类号：

08 ; 0825 ;

摘要：

Additive manufacturing (AM) is an important technology in Industry 4.0. In recent years, solid-state-based additive friction stir deposition (AFSD) has attracted much attention, as it can avoid the inherent defect of melting and rapid solidification in electron beam-based or laser-based AM technologies. The macro and micro laws, finite element simulation, and engineering application technology of the AFSD process are still in their early stages. This paper mainly reviews the equipment, mechanism, the effect of process parameters on macro/micro characters, and the engineering applications of the AFSD process. Further, based on the complex loading conditions during the AFSD process, some perspectives are proposed, including the characterization method, unified constitutive model, novel composite manufacturing technology, and systematic study of the AFSD process.

引用

页数：22

共 66 条

[1] Excellent strength-ductility synergy in metastable high entropy alloy by laser powder bed additive manufacturing [J].

Agrawal, P. ;

Thapliyal, S. ;

Nene, S. S. ;

Mishra, R. S. ;

McWilliams, B. A. ;

Cho, K. C. .

ADDITIVE MANUFACTURING, 2020, 32

[2] Processing-structure-property correlation in additive friction stir deposited Ti-6Al-4V alloy from recycled metal chips [J].

Agrawal, Priyanshi ;

Haridas, Ravi Sankar ;

Yadav, Surekha ;

Thapliyal, Saket ;

Gaddam, Supreeth ;

Verma, Ravi ;

Mishra, Rajiv S. .

ADDITIVE MANUFACTURING, 2021, 47

[3] Characterization of the fatigue behavior of additive friction stir-deposition AA2219 [J].

Anderson-Wedge, K. ;

Avery, D. Z. ;

Daniewicz, S. R. ;

Sowards, J. W. ;

Allison, P. G. ;

Jordon, J. B. ;

Amaro, R. L. .

INTERNATIONAL JOURNAL OF FATIGUE, 2021, 142

[4] Evaluation of Microstructure and Mechanical Properties of Al-Zn-Mg-Cu Alloy Repaired via Additive Friction Stir Deposition [J].

Avery, D. Z. ;

Cleek, C. E. ;

Phillips, B. J. ;

Rekha, M. Y. ;

Kinser, R. P. ;

Rao, H. M. ;

Brewer, L. N. ;

Allison, P. G. ;

Jordon, J. B. .

JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2022, 144 (03)

[5] Influence of Grain Refinement and Microstructure on Fatigue Behavior for Solid-State Additively Manufactured Al-Zn-Mg-Cu Alloy [J].

Avery, D. Z. ;

Phillips, B. J. ;

Mason, C. J. T. ;

Palermo, M. ;

Williams, M. B. ;

Cleek, C. ;

Rodriguez, O. L. ;

Allison, P. G. ;

Jordon, J. B. .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2020, 51 (06) :2778-2795

[6] Fatigue Behavior of Solid-State Additive Manufactured Inconel 625 [J].

Avery, D. Z. ;

Rivera, O. G. ;

Mason, C. J. T. ;

Phillips, B. J. ;

Jordon, J. B. ;

Su, J. ;

Hardwick, N. ;

Allison, P. G. .

JOM, 2018, 70 (11) :2475-2484

[7]

Babaniaris S., 2022, ADDIT MANUF LETT, V3, DOI [10.1016/j.addlet.2022.100096, DOI 10.1016/J.ADDLET.2022.100096]

[8] The effect of solutionizing and artificial aging on the microstructure and mechanical properties in solid-state additive manufacturing of precipitation hardened Al-Mg-Si alloy [J].

Beck, S. C. ;

Rutherford, B. A. ;

Avery, D. Z. ;

Phillips, B. J. ;

Rao, H. ;

Rekha, M. Y. ;

Brewer, L. N. ;

Allison, P. G. ;

Jordon, J. B. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 819

[9]

Calvert JR., 2015, Microstructure and mechanical properties of WE43 alloy produced via additive friction stir technology

[10] Exploring temperature-controlled friction stir powder additive manufacturing process for multi-layer deposition of aluminum alloys [J].

Chaudhary, Bhavesh ;

Jain, Neelesh Kumar ;

Murugesan, Jayaprakash ;

Patel, Vivek .

JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2022, 20 :260-268

← 1 2 3 4 5 6 7 →