As-cast microstructures and solidification paths of the Nb-Si-Ti ternary alloys in Nb5Si3-Ti5Si3 region

被引：11
|
作者：
Li, Yan [1 ]
Li, Chang-Rong [1 ]
Du, Zhen-Min [1 ]
Guo, Cui-Ping [1 ]
Zhao, Xin-Qing [2 ]
机构：
[1] Univ Sci & Technol Beijing, Sch Mat Sci & Engn, Beijing 100083, Peoples R China
[2] Beijing Univ Aeronaut & Astronaut, Sch Mat Sci & Engn, Beijing 100191, Peoples R China
来源：
RARE METALS | 2013年 / 32卷 / 05期
基金：
中国国家自然科学基金; 国家高技术研究发展计划(863计划);
关键词：
Nb-Si-Ti ternary system; Liquidus projection; Microstructure; Solidification path; SOLID PHASE-EQUILIBRIA; INTERMETALLIC ALLOYS; RICH ALLOYS; DIAGRAM; COMPOSITES; STRENGTH; SYSTEM;
D O I：
10.1007/s12598-013-0143-9
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The as-cast microstructures and solidification paths of the Nb-Si-Ti ternary alloys in the Nb5Si3-Ti5Si3 region were investigated. Since there exist some isomorphous compounds in the Nb5Si3-Ti5Si3 region, such as alpha Nb5Si3 with B3Cr5 prototype, beta Nb5Si3 with Si3W5 prototype, gamma Nb5Si3 with Mn5Si3 prototype, and Ti5Si3 with Mn5Si3 prototype, the primary solidification areas of these compounds were not typically indentified in previous experiments. In the present paper, the microstructure observation, the phase identification, and the composition measurement were performed using scanning electron microscopy (SEM), X-ray diffraction (XRD), and electron probe microanalysis (EPMA), respectively. No ternary compound is found. There exist three primary solidification areas, beta Nb5-x (Ti) (x) Si-3, alpha Nb5-x (Ti) (x) Si-3, and Ti5-x (Nb) (x) Si-3 in the Nb5Si3-Ti5Si3 region. Together with the literature-reported experimental data and optimization results, the liquidus projection of the whole Nb-Si-Ti ternary system is constructed, and totally ten primary solidification areas-diamond-Si, Nb1-x (Ti) (x) Si-2, Ti1-x (Nb) (x) Si-2, Ti1-x (Nb) (x) Si, Ti5-x (Nb) (x) Si-4, beta Nb5-x (Ti) (x) Si-3, alpha Nb5-x (Ti) (x) Si-3, Ti5-x (Nb) (x) Si-3, (Nb,Ti)(3)Si, and BCC-and nine transitional invariant reactions-L + Nb1-x (Ti) (x) Si-2 -> Ti1-x (Nb) (x) Si-2 + Si, L + Nb1-x (Ti) (x) Si-2 -> Ti1-x (Nb) (x) Si-2 + Ti5-x (Nb) (x) Si-4, L + Ti5-x (Nb) (x) Si-4 -> Ti1-x (Nb) (x) Si-2 + Ti1-x (Nb) (x) Si, L + beta Nb5-x (Ti)(5)Si-3 -> Nb1-x (Ti) (x) Si-2 + Ti5-x (Nb) (x) Si-4, L + beta Nb5-x (Ti) (x) Si-3 -> alpha Nb5-x (Ti) (x) Si-3 + Ti5-x (Nb) (x) Si-4, L + alpha Nb5-x (Ti) (x) Si-3 -> Ti5-x (Nb) (x) Si-3 + Ti5-x (Nb) (x) Si-4, L + alpha Nb5-x (Ti) (x) Si-3 -> beta Nb5-x (Ti) (x) Si-3 + Ti5-x (Nb) (x) Si-3, L + beta Nb5-x (Ti) (x) Si-3 -> Ti5-x (Nb) (x) Si-3 + (Nb,Ti)(3)Si, and L + (Nb,Ti)(3)Si -> Ti5-x (Nb) (x) Si-3 + BCC-are confirmed.
引用
收藏
页码：502 / 511
页数：10
相关论文
共 50 条
  • [21] Stability of the Nb5Si3 phase in the Nb-Mo-Si system
    Sekido, N.
    Hildal, K.
    Sakidja, R.
    Perepezko, J. H.
    INTERMETALLICS, 2013, 41 : 104 - 112
  • [22] Zr addition-induced transitions of deformation mechanism at high temperatures of Nb-Si-Ti based multi-alloys: Super-dislocations in y- Nb5Si3
    Ye, Chengtong
    Jia, Lina
    Jin, Zuheng
    Wang, Yu
    Wang, Wenbo
    Fu, Hanwei
    Zhang, Hu
    MATERIALS & DESIGN, 2022, 222
  • [23] Mechanical properties of microconstituents in Nb-Si-Ti alloy by micropillar compression and nanoindentation
    Guo, Enyu
    Singh, Sudhanshu S.
    Kaira, Chandrashekara S.
    Meng, Xianyu
    Xu, Yanjin
    Luo, Liangshun
    Wang, Mingyue
    Chawla, Nikhilesh
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 687 : 99 - 106
  • [24] Improving primary Nbss morphology and fracture toughness in hypoeutectic Nb-Si-Ti ternary alloy by ultrasonic treatment
    Wang, Shu
    Wang, Qi
    Chen, Ruirun
    Chai, Yue
    Jin, Yinling
    Su, Yanqing
    MATERIALS & DESIGN, 2021, 212
  • [25] Microstructure of laser cladding multi-layer Nb-Si-Ti
    Liang, Jing, 1710, Northeast University (35): : 1710 - 1714
  • [26] Eutectoid decomposition of βNb5Si3 →αNb5Si3 + Nbss in Nbss/Nb5Si3 in-situ composites revealed by electron microscopy
    Ma, Xiao
    Guo, Xiping
    Fu, Maosen
    MATERIALS CHARACTERIZATION, 2022, 191
  • [27] Effect of trace Ce and B additions on the microstructure of Nb-3Si-22Ti alloys
    Wu, Meiling
    Jiang, Liwu
    Qu, Shiyu
    Guo, Fengwei
    Li, Ming
    Kang, Yongwang
    Han, Yafang
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2017, 27 (03) : 362 - 368
  • [28] Structure and mechanical properties of as-cast Ti-5Nb-xCr alloys
    Hsu, Hsueh-Chuan
    Wu, Shih-Ching
    Hsu, Shih-Kuang
    Lin, Tsung-Fu
    Ho, Wen-Fu
    MATERIALS & DESIGN, 2013, 51 : 268 - 273
  • [29] Fracture toughness and high temperature strength of unidirectionally solidified Nb-Si binary and Nb-Ti-Si ternary alloys
    Sekido, Nobuaki
    Kimura, Yoshisato
    Miura, Seiji
    Wei, Fu-Gao
    Mishima, Yoshinao
    JOURNAL OF ALLOYS AND COMPOUNDS, 2006, 425 (1-2) : 223 - 229
  • [30] Effects of Ti Addition on Microstructure and Properties of Nb/Nb5Si3 in situ Composites by Spark Plasma Sintering
    Long Wenyuan
    Yao Junping
    Zhang Lei
    Lin Zhibin
    Zhao Lu
    RARE METAL MATERIALS AND ENGINEERING, 2013, 42 (05) : 989 - 992
12345