Determination of mode I and II adhesion toughness of monolayer thin films by circular blister tests

被引：9

作者：

Harvey, Christopher M. ^{[1
]}

Wang, Simon ^{[1
,2
]}

Yuan, Bo ^{[1
]}

Thomson, Rachel C. ^{[3
]}

Critchlow, Gary W. ^{[3
]}

机构：

[1] Loughborough Univ, Dept Aeronaut & Automot Engn, Loughborough LE11 3TU, Leics, England

[2] Hebei Univ Engn, Coll Mech & Equipment Engn, Handan 056038, Peoples R China

[3] Loughborough Univ, Dept Mat Engn, Loughborough LE11 3TU, Leics, England

来源：

THEORETICAL AND APPLIED FRACTURE MECHANICS | 2018年 / 94卷

关键词：

Adhesion toughness; Circular blisters; Energy release rate; Interface fracture; Thin films; FRACTURE-TOUGHNESS; SPALLING FAILURE; PARTITION; NUCLEATION; DECOHESION; OXIDATION; STRENGTH;

D O I：

10.1016/j.tafmec.2018.01.006

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Mechanical models are developed to determine the mode I and II adhesion toughness of monolayer thin films using circular blister tests under either pressure load or point load. The interface fracture of monolayer thin film blisters is mode I dominant for linear bending with small deflection while it is mode II dominant for membrane stretching with large deflection. By taking the advantage of the large mode mixity difference between these two limiting cases, the mode I and II adhesion toughness are determined in conjunction with a linear failure criterion. Thin films under membrane stretching have larger adhesion toughness than thicker films under bending. Experimental results demonstrate the validity of the method.

引用

页码：34 / 39

页数：6

共 34 条

[11] Spallation of thin films driven by pockets of energy concentration [J].

Harvey, Christopher M. ;

Wang, Bin ;

Wang, Simon .

THEORETICAL AND APPLIED FRACTURE MECHANICS, 2017, 92 :1-12

[12] Effects of morphology on the decohesion of compressed thin films [J].

He, MY ;

Evans, AG ;

Hutchinson, JW .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1998, 245 (02) :168-181

[13] The influence of imperfections on the nucleation and propagation of buckling driven delaminations [J].

Hutchinson, JW ;

He, MY ;

Evans, AG .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2000, 48 (04) :709-734

[14] GROWTH AND CONFIGURATIONAL STABILITY OF CIRCULAR, BUCKLING-DRIVEN FILM DELAMINATIONS [J].

HUTCHINSON, JW ;

THOULESS, MD ;

LINIGER, EG .

ACTA METALLURGICA ET MATERIALIA, 1992, 40 (02) :295-308

[15] MIXED-MODE CRACKING IN LAYERED MATERIALS [J].

HUTCHINSON, JW ;

SUO, Z .

ADVANCES IN APPLIED MECHANICS, VOL 29, 1992, 29 :63-191

[16] Analysis of mode mixity in blister tests [J].

Jensen, HM .

INTERNATIONAL JOURNAL OF FRACTURE, 1998, 94 (01) :79-88

[17] Numerical analysis of buckling-driven delamination [J].

Jensen, HM ;

Sheinman, I .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2002, 39 (13-14) :3373-3386

[18] Straight-sided, buckling-driven delamination of thin films at high stress levels [J].

Jensen, HM ;

Sheinman, I .

INTERNATIONAL JOURNAL OF FRACTURE, 2001, 110 (04) :371-385

[19] THE BLISTER TEST FOR INTERFACE TOUGHNESS MEASUREMENT [J].

JENSEN, HM .

ENGINEERING FRACTURE MECHANICS, 1991, 40 (03) :475-486

[20] THIN-FILM PEELING - ELASTIC TERM [J].

KENDALL, K .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 1975, 8 (13) :1449-1452

← 1 2 3 4 →