Mixed mode brittle and ductile fracture of a high strength rotor steel at room temperature

被引：11
|
作者：
Smith, DJ [1 ]
Ayatollahi, MR [1 ]
Davenport, JCW [1 ]
Swankie, TD [1 ]
机构：
[1] Univ Bristol, Dept Mech Engn, Bristol BS8 1TR, Avon, England
来源：
INTERNATIONAL JOURNAL OF FRACTURE | 1998年 / 94卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
mixed mode; brittle and ductile fracture; fracture transition; rotor steel; plastic collapse;
D O I：
10.1023/A:1007572406726
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The mixed mode fracture of a high strength rotor steel has been investigated at room temperature using single edge notched specimens. In mode I, and for limited amounts of shear loading, the steel exhibited cleavage fracture. For conditions near mode II ductile fracture occurred. A transition from brittle to ductile fracture occurred for mixed mode loading. Finite element analysis provided estimates of the extent of near crack tip yielding and elastic-plastic stress intensity factors. Test results agreed with the maximum tensile stress (MTS) criterion for small scale yielding for limited amounts of shear loading. The load for mode II fracture was lower than predicted from the MTS criterion, but higher than predicted from plastic collapse predictions. Observed fracture angles where in broad agreement with the predicted fracture mechanisms. The load for the transition from brittle to ductile fracture was found to agree approximately with the predicted load.
引用
收藏
页码：235 / 250
页数：16
相关论文
共 50 条
  • [31] Mixed-mode fracture toughness versus thickness and yield strength in aluminum alloys
    Seifi, Rahman
    Bahri, Mostafa
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2019, 41 (10)
  • [32] Mixed mode fatigue crack growth behavior of Ni-Cr-Mo-V high strength steel weldments
    Wang, Qiang
    Liu, Xuesong
    Wang, Wei
    Yang, Chao
    Xiong, Xiang
    Fang, Hongyuan
    INTERNATIONAL JOURNAL OF FATIGUE, 2017, 102 : 79 - 91
  • [33] Mixed-mode fracture toughness versus thickness and yield strength in aluminum alloys
    Rahman Seifi
    Mostafa Bahri
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2019, 41
  • [34] The role of T-stress in brittle fracture for linear elastic materials under mixed-mode loading
    Smith, DJ
    Ayatollahi, MR
    Pavier, MJ
    FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES, 2001, 24 (02) : 137 - 150
  • [35] Mixed-mode stress-corrosion cracking of high-strength steel: the role of cyclic load history
    Toribio, J
    Ovejero, E
    Kharin, V
    ADVANCES IN FRACTURE AND DAMAGE MECHANICS, 2003, 251-2 : 485 - 492
  • [36] Experimental and theoretical investigation of brittle fracture in key-hole notches under mixed mode I/II loading
    A. R. Torabi
    A. Campagnolo
    F. Berto
    Acta Mechanica, 2015, 226 : 2313 - 2322
  • [37] Evaluation of the effects of mixed mode I-II loading on elastic-plastic ductile fracture of metallic materials
    Laukkanen, A
    Wallin, K
    Rintamaa, R
    MIXED-MODE CRACK BEHAVIOR, 1999, 1359 : 3 - 20
  • [38] Study on Establish a Brittle Fracture Prediction Considering Different Crack Opening Modes Using Mixed-Mode Ratio
    Akahoshi, Takuya
    Azuma, Koji
    Iwashita, Tsutomu
    Itatani, Toshiomi
    APPLIED MECHANICS, 2021, 2 (04): : 849 - 862
  • [39] Mixed-Mode Fatigue and Fracture Assessment of a Steel Twin Box-Girder Bridge
    Irfaee, Mazin
    Mahmoud, Hussam
    JOURNAL OF BRIDGE ENGINEERING, 2019, 24 (07)
  • [40] Effect of bolt clamping force on the fracture strength of mixed mode fracture in an edge crack with different sizes: Experimental and numerical investigations
    Chakherlou, T. N.
    Maleki, H. N.
    Aghdam, A. B.
    Abazadeh, B.
    MATERIALS & DESIGN, 2013, 45 : 430 - 439
12345