Mixed mode brittle and ductile fracture of a high strength rotor steel at room temperature

被引：11
|
作者：
Smith, DJ [1 ]
Ayatollahi, MR [1 ]
Davenport, JCW [1 ]
Swankie, TD [1 ]
机构：
[1] Univ Bristol, Dept Mech Engn, Bristol BS8 1TR, Avon, England
来源：
INTERNATIONAL JOURNAL OF FRACTURE | 1998年 / 94卷 / 03期
基金：
英国工程与自然科学研究理事会;
关键词：
mixed mode; brittle and ductile fracture; fracture transition; rotor steel; plastic collapse;
D O I：
10.1023/A:1007572406726
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The mixed mode fracture of a high strength rotor steel has been investigated at room temperature using single edge notched specimens. In mode I, and for limited amounts of shear loading, the steel exhibited cleavage fracture. For conditions near mode II ductile fracture occurred. A transition from brittle to ductile fracture occurred for mixed mode loading. Finite element analysis provided estimates of the extent of near crack tip yielding and elastic-plastic stress intensity factors. Test results agreed with the maximum tensile stress (MTS) criterion for small scale yielding for limited amounts of shear loading. The load for mode II fracture was lower than predicted from the MTS criterion, but higher than predicted from plastic collapse predictions. Observed fracture angles where in broad agreement with the predicted fracture mechanisms. The load for the transition from brittle to ductile fracture was found to agree approximately with the predicted load.
引用
收藏
页码：235 / 250
页数：16
相关论文
共 50 条
  • [21] Mixed mode brittle fracture and fatigue in support to structural integrity assessment of laminar flaws
    Scibetta, Marc
    20TH EUROPEAN CONFERENCE ON FRACTURE, 2014, 3 : 847 - 854
  • [22] Initiation of ductile fracture in mixed-mode I and II aluminum alloy specimens
    Qian, Xudong
    Yang, Wuchao
    ENGINEERING FRACTURE MECHANICS, 2012, 93 : 189 - 203
  • [23] Mixed mode I/II brittle fracture evaluation of marble using SCB specimen
    Aliha, M. R. M.
    Ayatollahi, M. R.
    11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL BEHAVIOR OF MATERIALS (ICM11), 2011, 10
  • [24] Mixed mode fracture behaviour of steel fibre reinforced concrete
    Tian Sing Ng
    Stephen J. Foster
    Maung Linn Htet
    Trevor Nyan Soe Htut
    Materials and Structures, 2014, 47 : 67 - 76
  • [25] Brittle fracture of U-notched graphite plates under mixed mode loading
    Berto, F.
    Lazzarin, P.
    Marangon, C.
    MATERIALS & DESIGN, 2012, 41 : 421 - 432
  • [26] Fracture toughness study for a brittle rock subjected to mixed mode I/II loading
    Ayatollahi, M. R.
    Aliha, M. R. M.
    INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, 2007, 44 (04) : 617 - 624
  • [27] STUDY ON CORRECTING METHOD FOR PREDICTING BRITTLE FRACTURE OF SURFACE CRACKED PLATES IN MIXED-MODE LOADING
    Akahoshi, Takuya
    Azuma, Koji
    Iwashita, Tsutomu
    PROCEEDINGS OF ASME 2022 41ST INTERNATIONAL CONFERENCE ON OCEAN, OFFSHORE & ARCTIC ENGINEERING, OMAE2022, VOL 3, 2022,
  • [28] MIXED MODE FRACTURE IN REINFORCED CONCRETE WITH LOW VOLUME FRACTION OF STEEL FIBERS
    Kazemi, M. T.
    Zakeri, I.
    Shahvari, F. Vossoughi
    INTERNATIONAL JOURNAL OF ENGINEERING, 2011, 24 (01): : 1 - 18
  • [29] The applicability of J-integral approach in the determination of mixed-mode fracture energy in a ductile adhesive
    Sadeghi, M. Z.
    Zimmermann, J.
    Gabener, A.
    Schroeder, K. U.
    INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2018, 83 : 2 - 8
  • [30] Fracture of a low-carbon steel under mode I, mode II, and mixed-mode loading conditions
    A. P. Soldatenkov
    L. R. Botvina
    M. R. Tyutin
    V. P. Levin
    N. A. Zharkova
    Russian Metallurgy (Metally), 2013, 2013 (10) : 751 - 759
12345